Agco DT-200 A vs John Deere 8310

10 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the DT-200 A and the 8310 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 8 fields identical or within 5%, which is not counted as material

Agco DT-200 A and John Deere 8310, field by field
Field	DT-200 A	8310	Gap
Engine
Engine power, claimed claimed	231.7 hp	232 hp	—
Engine declared	SISU-DIESEL 74 ETA	John Deere-PowerTech 6.081 HRW-15	differs
Displacement declared	7.37 L	8.13 L	+10% 8310
Maximum torque declared	682 lb·ft · 924 N·m	741 lb·ft · 1,005 N·m	+9% 8310
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated hydraulic wet John Deere multi-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	37.4 gpm · 141.5 L/min	31.8 gpm · 120.4 L/min	+18% DT-200 A
Pressure declared	3,336 psi · 230 bar	3,379 psi · 233 bar	—
Three-point lift at ends declared	14,648 lb · 6,644 kg	11,645 lb · 5,282 kg	+26% DT-200 A
Rear PTO speeds declared	540/1000/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,136 lb · 8,680 kg	19,864 lb · 9,010 kg	—
Maximum permissible mass declared	30,865 lb · 14,000 kg	30,865 lb · 14,000 kg	—
Wheelbase declared	121.1 in · 3,075 mm	116.1 in · 2,950 mm	—
Length declared	206.3 in · 5,240 mm	216.0 in · 5,487 mm	—
Width declared	100.4 in · 2,550 mm	118.6 in · 3,012 mm	+18% 8310
Height declared	121.7 in · 3,090 mm	121.1 in · 3,075 mm	—
Ground clearance declared	19.7 in · 500 mm	15.9 in · 405 mm	+23% DT-200 A
Fuel tank declared	697.4 qt · 660.0 L	540.0 qt · 511.0 L	+29% DT-200 A

Source

Source