Agco DT-200 A vs Fendt 927 Vario

9 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

2006–2015

No measured PTO figure

Which should you choose?

Read our verdict on the DT-200 A and the 927 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Agco DT-200 A and Fendt 927 Vario, field by field
Field	DT-200 A	927 Vario	Gap
Engine
Engine power, claimed claimed	231.7 hp	236 hp	—
Engine declared	SISU-DIESEL 74 ETA	—	—
Displacement declared	7.37 L	—	—
Maximum torque declared	682 lb·ft · 924 N·m	811 lb·ft · 1,100 N·m	+19% 927 Vario
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	31.1–37.3 mph · 50–60 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	37.4 gpm · 141.5 L/min	—	—
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	14,648 lb · 6,644 kg	26,455 lb · 12,000 kg	+81% 927 Vario
Rear PTO speeds declared	540/1000/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,136 lb · 8,680 kg	22,223 lb · 10,080 kg	+16% 927 Vario
Maximum permissible mass declared	30,865 lb · 14,000 kg	39,683 lb · 18,000 kg	+29% 927 Vario
Wheelbase declared	121.1 in · 3,075 mm	120.1 in · 3,050 mm	—
Length declared	206.3 in · 5,240 mm	222.6 in · 5,655 mm	+8% 927 Vario
Width declared	100.4 in · 2,550 mm	108.3 in · 2,750 mm	+8% 927 Vario
Height declared	121.7 in · 3,090 mm	130.8 in · 3,322 mm	+8% 927 Vario
Ground clearance declared	19.7 in · 500 mm	20.1 in · 510 mm	—
Fuel tank declared	697.4 qt · 660.0 L	697.4 qt · 660 L	—

Source

Source