11 material differences · fewer than 12

Tractor oneAgco DT-1802002–2004No measured PTO figureTractor twoMassey Ferguson MF 8150 A1995–1999No measured PTO figure

Which should you choose?

Read our verdict on the DT-180 and the MF 8150 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Agco DT-180 and Massey Ferguson MF 8150 A, field by field
Field	DT-180	MF 8150 A	Gap
Engine
Engine power, claimed claimed	179.6 hp	177.7 hp	—
Engine declared	CUMMINS CTA-8.3	VALMET 620 DS	differs
Displacement declared	8.27 L	6.60 L	+25% DT-180
Maximum torque declared	633 lb·ft · 858 N·m	479 lb·ft · 649 N·m	+32% DT-180
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet VALEO multi-plate clutch	Pedal-operated dry VALEO double clutch	differs
Hydraulics & hitch
Pump flow declared	30.3 gpm · 114.7 L/min	14.1 gpm · 53.3 L/min	+115% DT-180
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	19,709 lb · 8,940 kg	12,434 lb · 5,640 kg	+59% DT-180
Rear PTO speeds declared	1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	19,484 lb · 8,838 kg	14,815 lb · 6,720 kg	+32% DT-180
Maximum permissible mass declared	—	25,353 lb · 11,500 kg	—
Wheelbase declared	121.0 in · 3,073 mm	115.7 in · 2,940 mm	—
Length declared	203.0 in · 5,156 mm	198.3 in · 5,038 mm	—
Width declared	98.2 in · 2,494 mm	83.5–103.7 in · 2,120–2,633 mm	differs
Height, over the cab declared	120.0 in · 3,048 mm	119.4 in · 3,034 mm	—
Ground clearance declared	18.0 in · 457 mm	18.2 in · 463 mm	—
Fuel tank declared	479.7 qt · 454.0 L	285.3 qt · 270.0 L	+68% DT-180

Source

Source