Agco DT-180 A or Massey Ferguson MF 8450?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-180 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson 8450 suits loader and hydraulic implement work better on this data: 61% (4,063 kg / 8,957 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DT-180 A | MF 8450 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 158.1 kW (212.0 hp)Traktorenlexikon, “AGCO DT 180 A” | 158.2 kW (212.1 hp)Traktorenlexikon, “Massey Ferguson MF 8450” | Not comparableNot comparable on power at the PTO shaft: the DT-180 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-180 A and the MF 8450. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DT-180 A and the MF 8450. |
| Which pumps more oil for implements? | 141.5 L/min (37.4 gpm)Traktorenlexikon, “AGCO DT 180 A” | 150.0 L/min (39.6 gpm)Traktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 6,644 kg (14,648 lb)Traktorenlexikon, “AGCO DT 180 A” | 10,707 kg (23,605 lb)Traktorenlexikon, “Massey Ferguson MF 8450” | AheadThe Massey Ferguson 8450 has 61% more lift (4,063 kg / 8,957 lb) than the Agco DT-180A (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 9,030 kg (19,908 lb)Traktorenlexikon, “AGCO DT 180 A” | 9,040 kg (19,930 lb)Traktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 14,000 kg (30,865 lb)Traktorenlexikon, “AGCO DT 180 A” | 14,000 kg (30,865 lb)Traktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | Stepless (CVT)Traktorenlexikon, “AGCO DT 180 A” | Stepless (CVT)Traktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on gears: every machine is stepless. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DT-180 A and the MF 8450. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “AGCO DT 180 A” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E rpmTraktorenlexikon, “AGCO DT 180 A” | 540/1000/540E rpmTraktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 8450” | No figureNo call on PTO independence: not stated for the DT-180 A. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO DT 180 A” | 4WDTraktorenlexikon, “Massey Ferguson MF 8450” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2005–2008 | 2004–2008 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson 8450 has 61% more lift (4,063 kg / 8,957 lb) than the Agco DT-180A (both lift at the hitch ends, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on gears: every machine is stepless.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the DT-180 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 8450 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources