Agco DT-160 or WHITE 160?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the DT-160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Agco DT-160 suits loader and hydraulic implement work better on this data: 40% (33.3 L/min / 8.8 gpm) more hydraulic flow and 129% (4,109 kg / 9,059 lb) more three-point lift.
- The Agco DT-160 suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | DT-160 | 160 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 119.2 kW (159.8 hp)Traktorenlexikon, “AGCO DT 160” | 119.2 kW (159.8 hp)Traktorenlexikon, “White 160” | Not comparableNot comparable on power at the PTO shaft: the DT-160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the DT-160 and the 160. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the DT-160 and the 160. |
| Which pumps more oil for implements? | 116.6 L/min (30.8 gpm)Traktorenlexikon, “AGCO DT 160” | 83.3 L/min (22.0 gpm)Traktorenlexikon, “White 160” | AheadThe Agco DT-160 has 40% more hydraulic flow (33.3 L/min / 8.8 gpm) than the WHITE 160 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 7,300 kg (16,094 lb)Traktorenlexikon, “AGCO DT 160” | 3,191 kg (7,035 lb)Traktorenlexikon, “White 160” | AheadThe Agco DT-160 has 129% more lift (4,109 kg / 9,059 lb) than the WHITE 160 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 8,623 kg (19,010 lb)Traktorenlexikon, “AGCO DT 160” | 5,985 kg (13,195 lb)Traktorenlexikon, “White 160” | Ahead (a fact, not an advantage)The Agco DT-160 is 44% heavier (2,638 kg / 5,816 lb) than the WHITE 160 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the DT-160 and the 160. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “AGCO DT 160” | 18Traktorenlexikon, “White 160” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the DT-160 and the 160. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “AGCO DT 160” | 30 km/h (18.6 mph)Traktorenlexikon, “White 160” | AheadThe Agco DT-160 has 33% more top speed (10.0 km/h / 6.2 mph) than the WHITE 160 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “AGCO DT 160” | 1000 rpmTraktorenlexikon, “White 160” | AheadThe Agco DT-160 offers 540 rpm at the PTO, which the WHITE 160 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “AGCO DT 160” | independentTraktorenlexikon, “White 160” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “AGCO DT 160” | Two-wheel or four-wheel driveTraktorenlexikon, “White 160” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2002–2004 | 1987–1990 | Ahead (a fact, not an advantage)The Agco DT-160 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Agco DT-160 has 40% more hydraulic flow (33.3 L/min / 8.8 gpm) than the WHITE 160 (both pump flow, as stated by the source).
- The Agco DT-160 has 129% more lift (4,109 kg / 9,059 lb) than the WHITE 160 (both lift at the hitch ends, as stated by the source).
- The Agco DT-160 is 44% heavier (2,638 kg / 5,816 lb) than the WHITE 160 (both unladen weight, as stated by the source).
- The Agco DT-160 has 33% more top speed (10.0 km/h / 6.2 mph) than the WHITE 160 (both top speed forward, as stated by the source).
- The Agco DT-160 offers 540 rpm at the PTO, which the WHITE 160 does not (as stated by the sources).
- The Agco DT-160 is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the DT-160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 160 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources