11 material differences · fewer than 12
Tractor oneAgco DT-1602002–2004No measured PTO figureTractor twoWHITE 1601987–1990No measured PTO figure
Which should you choose?
Read our verdict on the DT-160 and the 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DT-160 | 160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 159.8 hp | 159.8 hp | — |
| Engine declared | CUMMINS C-8.3 T | CUMMINS CT 6-830 | differs |
| Displacement declared | 8.27 L | 8.28 L | — |
| Maximum torque declared | 538 lb·ft · 729 N·m | 421 lb·ft · 571 N·m | +28% DT-160 |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% DT-160 |
| Clutch declared | Pedal operated wet VALEO multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 30.8 gpm · 116.6 L/min | 22.0 gpm · 83.3 L/min | +40% DT-160 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Three-point lift, at the coupling points declared | 16,094 lb · 7,300 kg | 7,035 lb · 3,191 kg | +129% DT-160 |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 19,010 lb · 8,623 kg | 13,195 lb · 5,985 kg | +44% DT-160 |
| Wheelbase declared | 121.0 in · 3,073 mm | 112.0 in · 2,845 mm | +8% DT-160 |
| Length declared | 203.0 in · 5,156 mm | 180.0 in · 4,572 mm | +13% DT-160 |
| Width declared | 98.2 in · 2,494 mm | 96.0 in · 2,438 mm | — |
| Ground clearance declared | 18.0 in · 457 mm | 23.0 in · 584 mm | +28% 160 |
| Turning radius, braked declared | — | 13.6 ft · 4.15 m | — |
| Fuel tank declared | 479.7 qt · 454.0 L | 140.5–156.4 qt · 133.0–148.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Agco DT-160 sources
- Source: Traktorenlexikon, “AGCO DT 160”
- Source: Traktorenlexikon, “White 8510”
WHITE 160 sources
- Source: Traktorenlexikon, “White 160”