AGCO-ALLIS 9775 vs Massey Ferguson MF 8260 A
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9775 and the MF 8260 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 9775 | MF 8260 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 204.1 hp | 207.3 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DTA-530 | VALMET 634 DSBAE | differs |
| Displacement declared | — | 7.37 L | — |
| Maximum torque declared | — | 628 lb·ft · 852 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Oil-cooled wet multi-plate clutch | Pedal operated hydraulic FUNK multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 33.1 gpm · 125.2 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,205 psi · 221 bar | — |
| Three-point lift at ends declared | 19,709 lb · 8,940 kg | 22,931 lb · 10,401 kg | +16% MF 8260 A |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 18,786 lb · 8,521 kg | 17,990 lb · 8,160 kg | — |
| Wheelbase declared | 112.5 in · 2,858 mm | 121.5 in · 3,087 mm | +8% MF 8260 A |
| Length declared | 203.0 in · 5,156 mm | 206.3 in · 5,240 mm | — |
| Width declared | 98.2 in · 2,494 mm | 99.1 in · 2,518 mm | — |
| Height declared | 121.0 in · 3,073 mm | 120.8 in · 3,068 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 16.7 in · 425 mm | — |
| Fuel tank declared | 479.7 qt · 454.0 L | 433.2 qt · 410 L | +11% 9775 |
AGCO-ALLIS 9775 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9775”
Massey Ferguson MF 8260 A sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 8260”
- Source: Traktorenlexikon, “Massey Ferguson MF 8250”