AGCO-ALLIS 9765 vs Agco DT-180
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9765 and the DT-180 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 9765 | DT-180 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 182.5 hp | 179.6 hp | — |
| Engine declared | INTERNATIONAL-NAVISTAR DT-530 | CUMMINS CTA-8.3 | differs |
| Displacement declared | — | 8.27 L | — |
| Maximum torque declared | — | 633 lb·ft · 858 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Oil-cooled wet multi-disc clutch | Pedal-operated wet VALEO multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 30.3 gpm · 114.7 L/min | — |
| Pressure declared | 3,046 psi · 210 bar | 3,046 psi · 210 bar | — |
| Three-point lift at ends declared | 19,709 lb · 8,940 kg | 19,709 lb · 8,940 kg | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 17,200 lb · 7,802 kg | 19,484 lb · 8,838 kg | +13% DT-180 |
| Wheelbase declared | 112.5 in · 2,858 mm | 121.0 in · 3,073 mm | +8% DT-180 |
| Length declared | 203.0 in · 5,156 mm | 203.0 in · 5,156 mm | — |
| Width declared | 98.2 in · 2,494 mm | 98.2 in · 2,494 mm | — |
| Height declared | 121.0 in · 3,073 mm | 120.0 in · 3,048 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 18.0 in · 457 mm | — |
| Fuel tank declared | 479.7 qt · 454.0 L | 479.7 qt · 454.0 L | — |
AGCO-ALLIS 9765 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9765”
- Source: Traktorenlexikon, “AGCO-Allis 9755”
Agco DT-180 sources
Source
- Source: Traktorenlexikon, “AGCO DT 180”