AGCO-ALLIS 9755 vs VALMET 2105-4

8 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

1986–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 9755 and the 2105-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9755 and VALMET 2105-4, field by field
Field	9755	2105-4	Gap
Engine
Engine power, claimed claimed	159.8 hp	160.8 hp	—
Engine declared	INTERNATIONAL-NAVISTAR DT-530	VOLVO TD 60 K	differs
Displacement declared	—	5.48 L	—
Maximum torque declared	—	395 lb·ft · 536 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Oil-cooled wet multi-disc clutch	Pedal-operated, dry Automotive single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	—	16.1 gpm · 61.0 L/min	—
Pressure declared	3,046 psi · 210 bar	1,813 psi · 125 bar	+68% 9755
Three-point lift at ends declared	16,100 lb · 7,303 kg	10,543 lb · 4,782 kg	+53% 9755
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,302 lb · 7,848 kg	14,099 lb · 6,395 kg	+23% 9755
Maximum permissible mass declared	—	18,905 lb · 8,575 kg	—
Wheelbase declared	112.5 in · 2,858 mm	112.0 in · 2,845 mm	—
Length declared	203.0 in · 5,156 mm	185.8 in · 4,720 mm	+9% 9755
Width declared	98.2 in · 2,494 mm	96.1 in · 2,440 mm	—
Height declared	121.0 in · 3,073 mm	122.0 in · 3,100 mm	—
Ground clearance declared	—	12.4 in · 315 mm	—
Turning radius, braked declared	—	14.8 ft · 4.52 m	—
Fuel tank declared	479.7 qt · 454.0 L	221.9 qt · 210.0 L	+116% 9755

Source

Source