11 material differences · fewer than 12
Tractor oneAGCO-ALLIS 97451998–2001No measured PTO figureTractor twoDEUTZ-ALLIS 71451987–1989No measured PTO figure
Which should you choose?
Read our verdict on the 9745 and the 7145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 9745 | 7145 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 145.0 hp | 144.0 hp | — |
| Engine declared | SISU-DIESEL 66.6 TW | K.H.D. BF6L 913 T | differs |
| Displacement declared | 6.59 L | 6.13 L | +8% 9745 |
| Maximum torque declared | 498 lb·ft · 675 N·m | 386 lb·ft · 523 N·m | +29% 9745 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Oil-cooled wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Open centre | differs |
| Pump flow declared | 29.7 gpm · 112.4 L/min | 27.3 gpm · 103.3 L/min | +9% 9745 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 15,130 lb · 6,863 kg | 11,905 lb · 5,400 kg | +27% 9745 |
| Wheelbase declared | 117.5 in · 2,985 mm | 103.5 in · 2,629 mm | +14% 9745 |
| Length declared | 203.0 in · 5,156 mm | 187.8 in · 4,770 mm | +8% 9745 |
| Width declared | 98.4 in · 2,499 mm | 93.3 in · 2,370 mm | +5% 9745 |
| Ground clearance declared | — | 24.4 in · 620 mm | — |
| Fuel tank declared | 399.4 qt · 378.0 L | 264.2 qt · 250.0 L | +51% 9745 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9745 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9745”
DEUTZ-ALLIS 7145 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 7145”
- Source: Traktorenlexikon, “Deutz-Allis 7120”