AGCO-ALLIS 9735 vs John Deere 6620

11 material differences · fewer than 12

Tractor one

1998–2001

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 9735 and the 6620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9735 and John Deere 6620, field by field
Field	9735	6620	Gap
Engine
Engine power, claimed claimed	125.3 hp	123 hp	—
Engine declared	SISU-DIESEL 666 T	John Deere PowrTech 6.068 HLA-070/V2-DE or 6.068 HL-471/HP	differs
Displacement declared	6.59 L	6.79 L	—
Maximum torque declared	440 lb·ft · 596 N·m	353 lb·ft · 479.0 N·m	+24% 9735
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	oil cooled wet multi disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.7 gpm · 112.4 L/min	—	—
Pressure declared	3,046 psi · 210 bar	3,017–3,220 psi · 208–222 bar	differs
Three-point lift at ends declared	14,760 lb · 6,695 kg	16,755 lb · 7,600 kg	+14% 6620
Rear PTO speeds declared	540/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	15,031 lb · 6,818 kg	13,040 lb · 5,915 kg	+15% 9735
Maximum permissible mass declared	—	20,944 lb · 9,500 kg	—
Wheelbase declared	117.5 in · 2,985 mm	104.3 in · 2,650 mm	+13% 9735
Length declared	203.0 in · 5,156 mm	185.2 in · 4,705 mm	+10% 9735
Width declared	98.4 in · 2,499 mm	96.3 in · 2,445 mm	—
Height declared	120.0 in · 3,048 mm	113.2 in · 2,875 mm	+6% 9735
Ground clearance declared	—	18.1 in · 460 mm	—
Fuel tank declared	399.4 qt · 378.0 L	218.7 qt · 207.0 L	+83% 9735

Source

Source