AGCO-ALLIS 9690 vs Case-IH MX 210

12 material differences

Tractor one

1994–1995

No measured PTO figure

Tractor two

2002–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 9690 and the MX 210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9690 and Case-IH MX 210, field by field
Field	9690	MX 210	Gap
Engine
Engine power, claimed claimed	195.3 hp	197.3 hp	—
Engine declared	K.H.D. BF6L 513 RC	CUMMINS 6 TAA-830	differs
Displacement declared	9.57 L	8.27 L	+16% 9690
Maximum torque declared	589 lb·ft · 798 N·m	693 lb·ft · 939 N·m	+18% MX 210
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Hydraulically operated wet FUNK multi-plate clutch	Case-IH multi-disc clutch running in an oil bath	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Closed centre	—
Pump flow declared	21.8 gpm · 82.5 L/min	38.6 gpm · 146.1 L/min	+77% MX 210
Pressure declared	2,944 psi · 203 bar	3,024 psi · 208.5 bar	—
Three-point lift at ends declared	8,173 lb · 3,707 kg	16,749 lb · 7,597 kg	+105% MX 210
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	18,100 lb · 8,210 kg	20,205 lb · 9,165 kg	+12% MX 210
Maximum permissible mass declared	—	30,865 lb · 14,000 kg	—
Wheelbase declared	115.0 in · 2,921 mm	118.3 in · 3,005 mm	—
Length declared	200.0 in · 5,080 mm	224.0 in · 5,690 mm	+12% MX 210
Width declared	96.0 in · 2,438 mm	120.0 in · 3,048 mm	+25% MX 210
Height declared	121.0 in · 3,073 mm	124.0 in · 3,150 mm	—
Ground clearance declared	17.0 in · 432 mm	13.8 in · 350 mm	+23% 9690
Turning radius, braked declared	14.6 ft · 4.45 m	—	—
Fuel tank declared	387.8 qt · 367.0 L	519.9 qt · 492.0 L	+34% MX 210

Source

Source