8 material differences · fewer than 12
Tractor oneAGCO-ALLIS 96901994–1995No measured PTO figureTractor twoAgco RT-165 A2007–2011No measured PTO figure
Which should you choose?
Read our verdict on the 9690 and the RT-165 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 9690 | RT-165 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 195.3 hp | 194.3 hp | — |
| Engine declared | K.H.D. BF6L 513 RC | SISU-DIESEL 74 CTA-4V | differs |
| Displacement declared | 9.57 L | 7.37 L | +30% 9690 |
| Maximum torque declared | 589 lb·ft · 798 N·m | 634 lb·ft · 859 N·m | +8% RT-165 A |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | Hydraulically operated wet FUNK multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 21.8 gpm · 82.5 L/min | 30.8 gpm · 116.6 L/min | +41% RT-165 A |
| Pressure declared | 2,944 psi · 203 bar | 3,336 psi · 230 bar | +13% RT-165 A |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 18,100 lb · 8,210 kg | 17,461 lb · 7,920 kg | — |
| Wheelbase declared | 115.0 in · 2,921 mm | 118.0 in · 2,996 mm | — |
| Length declared | 200.0 in · 5,080 mm | 210.0 in · 5,334 mm | — |
| Width declared | 96.0–140.0 in · 2,438–3,556 mm | 79.1–100.2 in · 2,009–2,545 mm | differs |
| Ground clearance declared | 17.0 in · 432 mm | 22.4 in · 570 mm | +32% RT-165 A |
| Turning radius, braked declared | 14.6 ft · 4.45 m | — | — |
| Fuel tank declared | 387.8 qt · 367.0 L | 399.4 qt · 378.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 9690 sources
- Source: Traktorenlexikon, “AGCO-Allis 9690”
- Source: Traktorenlexikon, “AGCO-Allis 9670”
Agco RT-165 A sources
- Source: Traktorenlexikon, “AGCO RT 165 A”