AGCO-ALLIS 9675 vs Deutz-Fahr Agrotron 175 MK3

10 material differences · fewer than 12

Tractor one

1994–1998

No measured PTO figure

Tractor two

2001–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 9675 and the Agrotron 175 MK3 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9675 and Deutz-Fahr Agrotron 175 MK3, field by field
Field	9675	Agrotron 175 MK3	Gap
Engine
Engine power, claimed claimed	174.6 hp	172.7 hp	—
Engine declared	DETROIT-DIESEL DT-530	Deutz BF6M 1013 E	differs
Displacement declared	8.71 L	7.15 L	+22% 9675
Maximum torque declared	601 lb·ft · 815 N·m	483 lb·ft · 655 N·m	+24% 9675
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	electrohydraulically actuated wet FUNK multi-disc clutch	Hydraulically-operated wet ZF multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	28.1 gpm · 106.4 L/min	31.1 gpm · 117.9 L/min	+11% Agrotron 175 MK3
Pressure declared	—	2,973 psi · 205 bar	—
Three-point lift at ends declared	6,318 lb · 2,866 kg	22,046 lb · 10,000 kg	+249% Agrotron 175 MK3
Rear PTO speeds declared	1000 rpm	540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	14,559 lb · 6,604 kg	16,446 lb · 7,460 kg	+13% Agrotron 175 MK3
Maximum permissible mass declared	—	26,455 lb · 12,000 kg	—
Wheelbase declared	123.2 in · 3,129 mm	119.3 in · 3,030 mm	—
Length declared	200.0 in · 5,080 mm	187.3 in · 4,757 mm	+7% 9675
Width declared	98.0 in · 2,489 mm	97.6 in · 2,480 mm	—
Height declared	121.0 in · 3,073 mm	120.5 in · 3,060 mm	—
Ground clearance declared	23.0 in · 584 mm	23.6 in · 600 mm	—
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	387.8 qt · 367.0 L	401.5 qt · 380 L	—

Source

Source