AGCO-ALLIS 9670 vs Fiat 1880 (DT)

13 material differences

Tractor one

1994–1995

No measured PTO figure

Tractor two

1979–1984

No measured PTO figure

Which should you choose?

Read our verdict on the 9670 and the 1880 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9670 and Fiat 1880 (DT), field by field
Field	9670	1880 (DT)	Gap
Engine
Engine power, claimed claimed	174.6 hp	177.7 hp	—
Engine declared	K.H.D. BF6L 513 RC	FIAT-IVECO 8365.25.500	differs
Displacement declared	9.57 L	8.10 L	+18% 9670
Maximum torque declared	550 lb·ft · 746 N·m	504 lb·ft · 684 N·m	+9% 9670
Transmission
Top speed declared	24.9 mph · 40 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Hydraulically operated wet FUNK multi-disc clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	19.5 gpm · 73.8 L/min	14.7 gpm · 55.8 L/min	+32% 9670
Pressure declared	2,538 psi · 175 bar	3,336–3,481 psi · 230–240 bar	differs
Three-point lift at ends declared	—	13,007 lb · 5,900 kg	—
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,100 lb · 7,303 kg	14,286 lb · 6,480 kg	+13% 9670
Maximum permissible mass declared	—	22,046 lb · 10,000 kg	—
Wheelbase declared	120.5 in · 3,061 mm	116.7 in · 2,963 mm	—
Length declared	200.0 in · 5,080 mm	171.9 in · 4,365 mm	+16% 9670
Width declared	96.0 in · 2,438 mm	92.9 in · 2,360 mm	—
Height declared	121.0 in · 3,073 mm	112.8 in · 2,865 mm	+7% 9670
Ground clearance declared	23.0 in · 584 mm	27.4 in · 695 mm	+19% 1880 (DT)
Turning radius, braked declared	13.8 ft · 4.20 m	15.1 ft · 4.60 m	+10% 1880 (DT)
Fuel tank declared	387.8 qt · 367.0 L	190.2 qt · 180.0 L	+104% 9670

Source

Source