AGCO-ALLIS 9655 vs Massey Ferguson MF 3655 (A)

14 material differences

Tractor one

1994–1998

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 9655 and the MF 3655 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9655 and Massey Ferguson MF 3655 (A), field by field
Field	9655	MF 3655 (A)	Gap
Engine
Engine power, claimed claimed	154.9 hp	153.0 hp	—
Engine declared	DETROIT-DIESEL DT-466	Perkins 1006-6 THR 4	differs
Displacement declared	7.61 L	5.99 L	+27% 9655
Maximum torque declared	486 lb·ft · 659 N·m	400 lb·ft · 542 N·m	+22% 9655
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	electrohydraulically actuated wet Funk multi-disc clutch type 9400	Pedal-operated, dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	20.5 gpm · 77.6 L/min	13.4 gpm · 50.6 L/min	+53% 9655
Pressure declared	2,944 psi · 203 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	5,913 lb · 2,682 kg	14,110 lb · 6,400 kg	+139% MF 3655 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	16,204 lb · 7,350 kg	11,817 lb · 5,360 kg	+37% 9655
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	123.2 in · 3,129 mm	109.3 in · 2,777 mm	+13% 9655
Length declared	187.5 in · 4,762 mm	183.0 in · 4,649 mm	—
Width declared	96.0 in · 2,438 mm	82.2 in · 2,088 mm	+17% 9655
Height declared	123.5 in · 3,137 mm	114.4 in · 2,905 mm	+8% 9655
Ground clearance declared	23.0 in · 584 mm	16.9 in · 430 mm	+36% 9655
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	267.9–387.8 qt · 253.5–367.0 L	338.1 qt · 320.0 L	differs

Source

Source