AGCO-ALLIS 9170 vs DEUTZ-ALLIS 8070
6 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9170 and the 8070 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 9170 | 8070 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 172 hp | 169.6 hp | — |
| Engine declared | K.H.D. BF6L 513 R-T | ALLIS-CHALMERS 670 TI | differs |
| Displacement declared | 9.57 L | 6.98 L | +37% 9170 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Electro-hydraulically operated wet multi-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 23.0 gpm · 86.9 L/min | 22.0 gpm · 83.3 L/min | — |
| Pressure declared | 3,771 psi · 260 bar | 3,771 psi · 260 bar | — |
| Three-point lift at ends declared | 7,628 lb · 3,460 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 15,640 lb · 7,094 kg | 16,850 lb · 7,643 kg | +8% 8070 |
| Wheelbase declared | 119.0 in · 3,023 mm | 106.0 in · 2,692 mm | +12% 9170 |
| Length declared | 200.0 in · 5,080 mm | 187.0 in · 4,750 mm | +7% 9170 |
| Width declared | 96.0 in · 2,438 mm | 95.5 in · 2,426 mm | — |
| Height declared | 122.0 in · 3,099 mm | 116.0 in · 2,946 mm | — |
| Ground clearance declared | 23.0 in · 584 mm | 22.0 in · 559 mm | — |
| Turning radius, braked declared | 14.0 ft · 4.27 m | 13.3 ft · 4.06 m | — |
| Fuel tank declared | 367.7 qt · 348.0 L | 239.9 qt · 227.0 L | +53% 9170 |
AGCO-ALLIS 9170 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 9170”
- Source: Traktorenlexikon, “Deutz-Allis 9170”
DEUTZ-ALLIS 8070 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8070”
- Source: Traktorenlexikon, “Deutz-Allis 8050”