8 material differences · fewer than 12

Tractor oneAGCO-ALLIS 87451998–1999No measured PTO figureTractor twoHürlimann H-468.4 A1998–2003No measured PTO figure

Which should you choose?

Read our verdict on the 8745 and the H-468.4 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8745 and Hürlimann H-468.4 A, field by field
Field	8745	H-468.4 A	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	CUMMINS B 3.9 T	Hürlimann H-1000.4 W	differs
Displacement declared	3.93 L	4.00 L	—
Maximum torque declared	—	187 lb·ft · 254 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	oil-cooled wet multi-plate clutch	Pedal-operated dry SLH single-disc clutch as driving clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	17.5 gpm · 66.2 L/min	9.5 gpm · 36.0 L/min	+84% 8745
Pressure declared	3,046 psi · 210 bar	2,611 psi · 180 bar	+17% 8745
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,970 lb · 3,615 kg	6,768 lb · 3,070 kg	+18% 8745
Wheelbase declared	98.8 in · 2,510 mm	90.2 in · 2,290 mm	+10% 8745
Length declared	161.0 in · 4,089 mm	157.1 in · 3,990 mm	—
Width declared	78.0 in · 1,981 mm	77.6–101.2 in · 1,970–2,570 mm	differs
Height, over the cab declared	103.0 in · 2,616 mm	100.0 in · 2,540 mm	—
Ground clearance declared	—	16.5 in · 420 mm	—
Turning radius, braked declared	—	12.3 ft · 3.76 m	—
Fuel tank declared	147.9 qt · 140.0 L	95.1 qt · 90.0 L	+56% 8745

Source

Source