AGCO-ALLIS 8745 vs Fiat 70-86 (DT)
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8745 and the 70-86 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8745 | 70-86 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 69.1 hp | — |
| Engine declared | CUMMINS B 3.9 T | FIAT-IVECO 8045.06.208 (309) | differs |
| Displacement declared | 3.93 L | 3.61 L | +9% 8745 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | oil-cooled wet multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 17.5 gpm · 66.2 L/min | 10.6 gpm · 40.0 L/min | +66% 8745 |
| Pressure declared | 3,046 psi · 210 bar | 3,118 psi · 215 bar | — |
| Three-point lift at ends declared | 5,732 lb · 2,600 kg | 5,236 lb · 2,375 kg | +9% 8745 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,970 lb · 3,615 kg | 4,292 lb · 1,947 kg | +86% 8745 |
| Wheelbase declared | 98.8 in · 2,510 mm | 77.1 in · 1,959 mm | +28% 8745 |
| Length declared | 161.0 in · 4,089 mm | 133.5 in · 3,390 mm | +21% 8745 |
| Width declared | 78.0 in · 1,981 mm | 60.6 in · 1,540 mm | +29% 8745 |
| Height declared | 103.0 in · 2,616 mm | 79.9 in · 2,029 mm | +29% 8745 |
| Ground clearance declared | — | 15.0 in · 380 mm | — |
| Fuel tank declared | 147.9 qt · 140.0 L | 47.6 qt · 45.0 L | +211% 8745 |
AGCO-ALLIS 8745 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8745”
- Source: Traktorenlexikon, “White 6410”
Fiat 70-86 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 70-86 V/70-86 V/DT”