AGCO-ALLIS 8630 vs Lamborghini R.1306 DT

7 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

from 2004

No measured PTO figure

Which should you choose?

Read our verdict on the 8630 and the R.1306 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8630 and Lamborghini R.1306 DT, field by field
Field	8630	R.1306 DT	Gap
Engine
Engine power, claimed claimed	128.2 hp	128.2 hp	—
Engine declared	S.L.H. 1000.6 AT	SAME 1000.6 WTI 11 (Tier-II)	differs
Displacement declared	6.00 L	6.00 L	—
Maximum torque declared	329 lb·ft · 446 N·m	330 lb·ft · 448 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry S.L.H. double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	16.2 gpm · 61.2 L/min	17.5 gpm · 66.2 L/min	+8% R.1306 DT
Pressure declared	2,176 psi · 150 bar	3,118 psi · 215 bar	+43% R.1306 DT
Three-point lift at ends declared	10,939 lb · 4,962 kg	11,905 lb · 5,400 kg	+9% R.1306 DT
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,100 lb · 5,035 kg	12,181 lb · 5,525 kg	+10% R.1306 DT
Maximum permissible mass declared	17,857 lb · 8,100 kg	—	—
Wheelbase declared	110.0 in · 2,794 mm	108.3 in · 2,750 mm	—
Length declared	183.6 in · 4,663 mm	175.2 in · 4,450 mm	—
Width declared	90.0 in · 2,286 mm	92.9 in · 2,360 mm	—
Height declared	116.2 in · 2,951 mm	111.0 in · 2,820 mm	—
Ground clearance declared	20.8 in · 528 mm	21.7 in · 550 mm	—
Turning radius, braked declared	12.8 ft · 3.90 m	—	—
Fuel tank declared	221.9 qt · 210.0 L	253.6 qt · 240.0 L	+14% R.1306 DT

Source

Source