AGCO-ALLIS 8610 vs VALMET 8050

11 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 8610 and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 8610 and VALMET 8050, field by field
Field	8610	8050	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	S.L.H. 1000.6 A	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	6.00 L	6.59 L	+10% 8050
Maximum torque declared	256 lb·ft · 347 N·m	340 lb·ft · 461 N·m	+33% 8050
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal operated dry S.L.H. double clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.3 gpm · 61.7 L/min	18.8 gpm · 71.0 L/min	+15% 8050
Pressure declared	2,176 psi · 150 bar	—	—
Three-point lift at ends declared	10,441 lb · 4,736 kg	14,110 lb · 6,400 kg	+35% 8050
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,869 lb · 4,930 kg	10,450 lb · 4,740 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% 8610
Length declared	179.5 in · 4,560 mm	187.3 in · 4,757 mm	—
Width declared	92.5 in · 2,350 mm	84.8 in · 2,155 mm	+9% 8610
Height declared	113.0 in · 2,870 mm	108.3 in · 2,750 mm	—
Ground clearance declared	19.3 in · 490 mm	18.7 in · 475 mm	—
Turning radius, braked declared	16.4 ft · 5.00 m	—	—
Fuel tank declared	243.0 qt · 230.0 L	174.4 qt · 165.0 L	+39% 8610

Source

Source