12 material differences
Tractor oneAGCO-ALLIS 76501991–1994No measured PTO figureTractor twoFendt 815 Vario / TMS2003–2009No measured PTO figure
Which should you choose?
Read our verdict on the 7650 and the 815 Vario / TMS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7650 | 815 Vario / TMS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 147.0 hp | 148 hp | — |
| Engine declared | S.L.H. 1056 PS | Deutz BF6M 2013 C | differs |
| Displacement declared | 6.24 L | 5.70 L | +9% 7650 |
| Maximum torque declared | 359 lb·ft · 487 N·m | 538 lb·ft · 730 N·m | +50% 815 Vario / TMS |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 31.1 mph · 50 km/h | +67% 815 Vario / TMS |
| Clutch declared | Pedal-operated dry S.L.H. double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 17.7 gpm · 67.0 L/min | 29.1 gpm · 110.0 L/min | +64% 815 Vario / TMS |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,566 lb · 5,700 kg | 14,661 lb · 6,650 kg | +17% 815 Vario / TMS |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | 27,558 lb · 12,500 kg | +47% 815 Vario / TMS |
| Wheelbase declared | 114.2 in · 2,901 mm | 107.1 in · 2,720 mm | +7% 7650 |
| Length declared | 185.2 in · 4,704 mm | 185.0 in · 4,700 mm | — |
| Width declared | 86.0 in · 2,184 mm | 100.4 in · 2,550 mm | +17% 815 Vario / TMS |
| Ground clearance declared | 20.4 in · 518 mm | 22.4 in · 570 mm | +10% 815 Vario / TMS |
| Turning radius, braked declared | 17.2 ft · 5.25 m | 16.7 ft · 5.10 m | — |
| Fuel tank declared | 221.9 qt · 210.0 L | 359.3 qt · 340 L | +62% 815 Vario / TMS |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 7650 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 7650”
Fendt 815 Vario / TMS sources
Source
- Source: Traktorenlexikon, “Fendt 815 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”