AGCO-ALLIS 7600 vs VALMET 8000

12 material differences

Tractor one

1991–1996

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 7600 and the 8000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7600 and VALMET 8000, field by field
Field	7600	8000	Gap
Engine
Engine power, claimed claimed	95.6 hp	96.7 hp	—
Engine declared	S.L.H. 1055 P	VALMET 620 D	differs
Displacement declared	5.19 L	6.59 L	+27% 8000
Maximum torque declared	242 lb·ft · 328 N·m	270 lb·ft · 366 N·m	+12% 8000
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal operated dry SLH double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	17.5 gpm · 66.4 L/min	—
Pressure declared	1,740 psi · 120 bar	2,901 psi · 200 bar	+67% 8000
Three-point lift at ends declared	10,141 lb · 4,600 kg	9,469 lb · 4,295 kg	+7% 7600
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,598 lb · 3,900 kg	10,053 lb · 4,560 kg	+17% 8000
Maximum permissible mass declared	11,464 lb · 5,200 kg	16,535 lb · 7,500 kg	+44% 8000
Wheelbase declared	104.6 in · 2,657 mm	100.7 in · 2,558 mm	—
Length declared	168.2 in · 4,272 mm	186.6 in · 4,740 mm	+11% 8000
Width declared	84.0 in · 2,134 mm	85.4 in · 2,170 mm	—
Height declared	110.0 in · 2,794 mm	107.1 in · 2,720 mm	—
Ground clearance declared	17.6 in · 447 mm	14.0 in · 355 mm	+26% 7600
Turning radius, braked declared	11.0 ft · 3.35 m	15.5 ft · 4.71 m	+41% 8000
Fuel tank declared	126.8 qt · 120.0 L	167.0 qt · 158.0 L	+32% 8000

Source

Source