AGCO-ALLIS 7600 vs Fiat F-100 DT

9 material differences · fewer than 12

Tractor one

1991–1996

No measured PTO figure

Tractor two

1990–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 7600 and the F-100 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7600 and Fiat F-100 DT, field by field
Field	7600	F-100 DT	Gap
Engine
Engine power, claimed claimed	95.6 hp	96.7 hp	—
Engine declared	S.L.H. 1055 P	FIAT-IVECO 8065.06.300 or 8065.05 A	differs
Displacement declared	5.19 L	—	—
Maximum torque declared	242 lb·ft · 328 N·m	241 lb·ft · 327 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal operated dry SLH double clutch	pedal-operated hydraulic dry LUK single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.9 gpm · 64.0 L/min	—	—
Pressure declared	1,740 psi · 120 bar	—	—
Three-point lift at ends declared	10,141 lb · 4,600 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,598 lb · 3,900 kg	10,582 lb · 4,800 kg	+23% F-100 DT
Maximum permissible mass declared	11,464 lb · 5,200 kg	16,535 lb · 7,500 kg	+44% F-100 DT
Wheelbase declared	104.6 in · 2,657 mm	106.0 in · 2,692 mm	—
Length declared	168.2 in · 4,272 mm	185.4 in · 4,710 mm	+10% F-100 DT
Width declared	84.0 in · 2,134 mm	83.1 in · 2,110 mm	—
Height declared	110.0 in · 2,794 mm	109.4 in · 2,780 mm	—
Ground clearance declared	17.6 in · 447 mm	19.9 in · 505 mm	+13% F-100 DT
Turning radius, braked declared	11.0 ft · 3.35 m	16.0 ft · 4.87 m	+45% F-100 DT
Fuel tank declared	126.8 qt · 120.0 L	232.5 qt · 220.0 L	+83% F-100 DT

Source

Source