AGCO-ALLIS 7600 vs AGCO-ALLIS 8775
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 7600 and the 8775 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 7600 | 8775 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 95.6 hp | 94.7 hp | — |
| Engine declared | S.L.H. 1055 P | SISU-DIESEL 666 | differs |
| Displacement declared | 5.19 L | — | — |
| Maximum torque declared | 242 lb·ft · 328 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | pedal operated dry SLH double clutch | Oil-cooled wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 16.9 gpm · 64.0 L/min | 29.8 gpm · 112.8 L/min | +76% 8775 |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Three-point lift at ends declared | 10,141 lb · 4,600 kg | 7,361 lb · 3,339 kg | +38% 7600 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,598 lb · 3,900 kg | 9,359 lb · 4,245 kg | +9% 8775 |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | — | — |
| Wheelbase declared | 104.6 in · 2,657 mm | 112.6 in · 2,860 mm | +8% 8775 |
| Length declared | 168.2 in · 4,272 mm | 176.0 in · 4,470 mm | — |
| Width declared | 84.0 in · 2,134 mm | 78.0 in · 1,981 mm | +8% 7600 |
| Height declared | 110.0 in · 2,794 mm | 109.0 in · 2,769 mm | — |
| Ground clearance declared | 17.6 in · 447 mm | — | — |
| Turning radius, braked declared | 11.0 ft · 3.35 m | — | — |
| Fuel tank declared | 126.8 qt · 120.0 L | 169.1 qt · 160.0 L | +33% 8775 |
AGCO-ALLIS 7600 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 7600”
AGCO-ALLIS 8775 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 8775”