AGCO-ALLIS 6670 vs Deutz-Fahr DX 3.65

15 material differences

Tractor one

1991–1999

No measured PTO figure

Tractor two

1987–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 6670 and the DX 3.65 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 6670 and Deutz-Fahr DX 3.65, field by field
Field	6670	DX 3.65	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	KHD F4L 912	differs
Displacement declared	4.00 L	3.77 L	+6% 6670
Maximum torque declared	176 lb·ft · 239 N·m	180 lb·ft · 244 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	independent dry double clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	9.5 gpm · 36.0 L/min	11.3 gpm · 42.6 L/min	+18% DX 3.65
Pressure declared	1,740 psi · 120 bar	3,481 psi · 240 bar	+100% DX 3.65
Three-point lift at ends declared	6,490 lb · 2,944 kg	7,275 lb · 3,300 kg	+12% DX 3.65
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,173 lb · 2,800 kg	7,496 lb · 3,400 kg	+21% DX 3.65
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	94.4 in · 2,398 mm	88.6 in · 2,250 mm	+7% 6670
Length declared	160.0 in · 4,064 mm	150.4 in · 3,820 mm	+6% 6670
Width declared	77.6 in · 1,970 mm	85.9 in · 2,183 mm	+11% DX 3.65
Height declared	108.0 in · 2,743 mm	101.6 in · 2,580 mm	+6% 6670
Ground clearance declared	15.0 in · 380 mm	16.1 in · 408 mm	+7% DX 3.65
Turning radius, braked declared	9.4 ft · 2.85 m	15.1 ft · 4.60 m	+61% DX 3.65
Fuel tank declared	113.1 qt · 107.0 L	76.1 qt · 72 L	+49% 6670

Source

Source