11 material differences · fewer than 12
Tractor oneAGCO-ALLIS 56801991–1997No measured PTO figureTractor twoCase-IH 845 XL (A)1990–1996No measured PTO figure
Which should you choose?
Read our verdict on the 5680 and the 845 XL (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 5680 | 845 XL (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | S.L.H. 1000.4 A-1 | IH D-268 | differs |
| Displacement declared | 4.00 L | 4.39 L | +10% 845 XL (A) |
| Maximum torque declared | 193 lb·ft · 261 N·m | 218 lb·ft · 296 N·m | +13% 845 XL (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated dry SAME double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 10.7 gpm · 40.5 L/min | 8.6 gpm · 32.6 L/min | +24% 5680 |
| Pressure declared | 3,046 psi · 210 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,669 lb · 3,025 kg | 8,069 lb · 3,660 kg | +21% 845 XL (A) |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | 12,787 lb · 5,800 kg | +12% 845 XL (A) |
| Wheelbase declared | 92.9 in · 2,360 mm | 94.1 in · 2,390 mm | — |
| Length declared | 154.3 in · 3,919 mm | 144.9 in · 3,680 mm | +6% 5680 |
| Width declared | 76.4–97.0 in · 1,941–2,464 mm | 80.7–88.6 in · 2,050–2,250 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 19.1 in · 484 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 12.6 ft · 3.85 m | +38% 845 XL (A) |
| Fuel tank declared | 83.5 qt · 79.0 L | 112.0 qt · 106.0 L | +34% 845 XL (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 5680 sources
- Source: Traktorenlexikon, “AGCO-Allis 5680”
Case-IH 845 XL (A) sources
- Source: Traktorenlexikon, “Case-IH 845XL”