AGCO-ALLIS 5670 vs Deutz-Fahr DX 3.65

14 material differences

Tractor one

1991–1999

No measured PTO figure

Tractor two

1987–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 5670 and the DX 3.65 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5670 and Deutz-Fahr DX 3.65, field by field
Field	5670	DX 3.65	Gap
Engine
Engine power, claimed claimed	69.1 hp	69.1 hp	—
Engine declared	S.L.H. 1000.4 A	KHD F4L 912	differs
Displacement declared	4.00 L	3.77 L	+6% 5670
Maximum torque declared	176 lb·ft · 239 N·m	180 lb·ft · 244 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated dry SAME double clutch	independent dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	—	Constant flow	—
Pump flow declared	9.5 gpm · 36.0 L/min	11.3 gpm · 42.6 L/min	+18% DX 3.65
Pressure declared	1,740 psi · 120 bar	3,481 psi · 240 bar	+100% DX 3.65
Three-point lift at ends declared	6,504 lb · 2,950 kg	7,275 lb · 3,300 kg	+12% DX 3.65
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,195 lb · 2,810 kg	7,496 lb · 3,400 kg	+21% DX 3.65
Maximum permissible mass declared	9,700 lb · 4,400 kg	11,023 lb · 5,000 kg	+14% DX 3.65
Wheelbase declared	91.3 in · 2,319 mm	88.6 in · 2,250 mm	—
Length declared	151.6 in · 3,851 mm	150.4 in · 3,820 mm	—
Width declared	73.2 in · 1,859 mm	85.9 in · 2,183 mm	+17% DX 3.65
Height declared	96.5 in · 2,451 mm	101.6 in · 2,580 mm	+5% DX 3.65
Ground clearance declared	17.7 in · 450 mm	16.1 in · 408 mm	+10% 5670
Turning radius, braked declared	9.2 ft · 2.80 m	15.1 ft · 4.60 m	+64% DX 3.65
Fuel tank declared	71.9 qt · 68.0 L	76.1 qt · 72 L	+6% DX 3.65

Source

Source