AGCO-ALLIS 5660 vs Case-IH JX 60 (A)

8 material differences · fewer than 12

Tractor one

1994–1999

No measured PTO figure

Tractor two

2004–2008

No measured PTO figure

Which should you choose?

Read our verdict on the 5660 and the JX 60 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 5660 and Case-IH JX 60 (A), field by field
Field	5660	JX 60 (A)	Gap
Engine
Engine power, claimed claimed	57.3 hp	58.2 hp	—
Engine declared	S.L.H. 1000.3 AT	IVECO 8035.050 (EURO II)	differs
Displacement declared	3.00 L	2.93 L	—
Maximum torque declared	137 lb·ft · 186 N·m	133 lb·ft · 181 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry SAME double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	9.5 gpm · 36.0 L/min	—	—
Pressure declared	1,305 psi · 90 bar	—	—
Three-point lift at ends declared	—	6,475 lb · 2,937 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,993 lb · 2,265 kg	5,710 lb · 2,590 kg	+14% JX 60 (A)
Wheelbase declared	82.9 in · 2,106 mm	85.6 in · 2,175 mm	—
Length declared	141.3 in · 3,589 mm	154.3 in · 3,918 mm	+9% JX 60 (A)
Width declared	72.6 in · 1,844 mm	71.2 in · 1,808 mm	—
Height declared	88.5 in · 2,248 mm	98.9 in · 2,512 mm	+12% JX 60 (A)
Ground clearance declared	19.7 in · 500 mm	10.8 in · 275 mm	+82% 5660
Turning radius, braked declared	9.5 ft · 2.90 m	11.8 ft · 3.60 m	+24% JX 60 (A)
Fuel tank declared	60.2 qt · 57.0 L	95.1 qt · 90.0 L	+58% JX 60 (A)

Source

Source