AGCO-ALLIS 5660 vs AGRIFULL 80-56 (DT)
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 5660 and the 80-56 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 5660 | 80-56 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.3 hp | 57.3 hp | — |
| Engine declared | S.L.H. 1000.3 AT | MWM D-227-3 | differs |
| Displacement declared | 3.00 L | 2.83 L | +6% 5660 |
| Maximum torque declared | 137 lb·ft · 186 N·m | 127 lb·ft · 172 N·m | +8% 5660 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry SAME double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.5 gpm · 36.0 L/min | 5.8 gpm · 22.0 L/min | +64% 5660 |
| Pressure declared | 1,305 psi · 90 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,993 lb · 2,265 kg | 5,071 lb · 2,300 kg | — |
| Wheelbase declared | 82.9 in · 2,106 mm | 85.6 in · 2,175 mm | — |
| Length declared | 141.3 in · 3,589 mm | 129.8 in · 3,298 mm | +9% 5660 |
| Width declared | 72.6 in · 1,844 mm | 76.0 in · 1,930 mm | — |
| Height declared | 88.5 in · 2,248 mm | 98.6 in · 2,504 mm | +11% 80-56 (DT) |
| Ground clearance declared | 19.7 in · 500 mm | 19.5 in · 495 mm | — |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 12.5 ft · 3.80 m | +31% 80-56 (DT) |
| Fuel tank declared | 60.2 qt · 57.0 L | 84.5 qt · 80.0 L | +40% 80-56 (DT) |
AGCO-ALLIS 5660 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 5660”
AGRIFULL 80-56 (DT) sources
Source
- Source: Traktorenlexikon, “Agrifull 80-56”