10 material differences · fewer than 12
Tractor oneAGCO-ALLIS 46501991–1997No measured PTO figureTractor twoLandini 5830 (DT) TL-22 N/G (TL-DT/L)1983–1987No measured PTO figure
Which should you choose?
Read our verdict on the 4650 and the 5830 (DT) TL-22 N/G (TL-DT/L) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 4650 | 5830 (DT) TL-22 N/G (TL-DT/L) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 49.3 hp | 49.3 hp | — |
| Engine declared | SAME 983-L | Perkins AD 3.152 S | differs |
| Displacement declared | 2.72 L | 2.50 L | +9% 4650 |
| Maximum torque declared | 104 lb·ft · 141 N·m | 133 lb·ft · 181 N·m | +28% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry SAME double clutch | Dry, air-cooled OMG double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.5 gpm · 28.5 L/min | 9.5 gpm · 36.1 L/min | +27% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Pressure declared | 1,740 psi · 120 bar | — | — |
| Three-point lift, at the coupling points declared | 4,630 lb · 2,100 kg | 4,519 lb · 2,050 kg | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,475 lb · 2,030 kg | 4,674 lb · 2,120 kg | — |
| Wheelbase declared | 82.1 in · 2,085 mm | 81.9 in · 2,080 mm | — |
| Length declared | 142.7 in · 3,625 mm | 140.7 in · 3,575 mm | — |
| Width declared | 65.9–85.6 in · 1,675–2,175 mm | 69.1 in · 1,755 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 17.1 in · 435 mm | +12% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Turning radius, braked declared | 11.6 ft · 3.55 m | 12.4 ft · 3.79 m | +7% 5830 (DT) TL-22 N/G (TL-DT/L) |
| Fuel tank declared | 58.1 qt · 55.0 L | 63.9 qt · 60.5 L | +10% 5830 (DT) TL-22 N/G (TL-DT/L) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 4650 sources
- Source: Traktorenlexikon, “AGCO-Allis 4650”
- Source: Traktorenlexikon, “Lamborghini 483 DT”
Landini 5830 (DT) TL-22 N/G (TL-DT/L) sources
- Source: Traktorenlexikon, “Landini 5830 (DT)”
- Source: Traktorenlexikon, “Massey Ferguson MF 255”