AGCO-ALLIS 4650 vs DEUTZ-ALLIS 6250

9 material differences · fewer than 12

Tractor one

1991–1997

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 4650 and the 6250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 4650 and DEUTZ-ALLIS 6250, field by field
Field	4650	6250	Gap
Engine
Engine power, claimed claimed	49.3 hp	50.3 hp	—
Engine declared	SAME 983-L	KHD F3L 912	differs
Displacement declared	2.72 L	2.83 L	—
Maximum torque declared	104 lb·ft · 141 N·m	122 lb·ft · 166 N·m	+18% 6250
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry SAME double clutch	Independent dry double clutch	differs
Hydraulics & hitch
Pump flow declared	7.5 gpm · 28.5 L/min	11.6 gpm · 43.9 L/min	+54% 6250
Pressure declared	1,740 psi · 120 bar	—	—
Three-point lift at ends declared	4,630 lb · 2,100 kg	5,291 lb · 2,400 kg	+14% 6250
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,475 lb · 2,030 kg	6,019 lb · 2,730 kg	+34% 6250
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	82.1 in · 2,085 mm	79.2 in · 2,012 mm	—
Length declared	142.7 in · 3,625 mm	137.4 in · 3,490 mm	—
Width declared	65.9 in · 1,675 mm	82.3 in · 2,090 mm	+25% 6250
Height declared	91.3 in · 2,320 mm	91.3 in · 2,320 mm	—
Ground clearance declared	15.4 in · 390 mm	16.1 in · 410 mm	—
Turning radius, braked declared	11.6 ft · 3.55 m	—	—
Fuel tank declared	58.1 qt · 55.0 L	79.3 qt · 75.0 L	+36% 6250

Source

Source