5 material differences · fewer than 12
Tractor oneAebi TT 241from 2016No measured PTO figureTractor twoDeutz-Fahr Agrotron 80 MK32001–2003No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (42%); they were not built in overlapping years (2016–2016; 2001–2003). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | TT 241 | Agrotron 80 MK3 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74 hp | 74.0 hp | — |
| Engine declared | — | Deutz BF 4 M 1012 E | — |
| Displacement declared | — | 3.19 L | — |
| Maximum torque declared | 229 lb·ft · 310 N·m | 218 lb·ft · 296 N·m | — |
| Transmission | |||
| Top speed declared | — | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Electro-hydraulic single-disc clutch | Hydraulically operated wet ZF multi-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40 L/min | 21.9 gpm · 83.0 L/min | +108% Agrotron 80 MK3 |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 8,752 lb · 3,970 kg | +42% Agrotron 80 MK3 |
| Maximum permissible mass declared | 9,921 lb · 4,500 kg | 14,330 lb · 6,500 kg | +44% Agrotron 80 MK3 |
| Wheelbase declared | — | 95.2 in · 2,419 mm | — |
| Length declared | 161.0 in · 4,090 mm | 157.7 in · 4,005 mm | — |
| Width declared | 83.1 in · 2,110 mm | 81.1 in · 2,060 mm | — |
| Ground clearance declared | — | 18.7 in · 475 mm | — |
| Fuel tank declared | — | 190.2 qt · 180 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Aebi TT 241 sources
- Source: Traktorenlexikon, “Aebi TT 241”
Deutz-Fahr Agrotron 80 MK3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”
- Source: Traktorenlexikon, “Fendt Farmer 307 C”