Will tractors be electric?

Small and yard machines first. Heavy field tractors last, and the reason is energy, not will.

Partly, and unevenly. Compact machines, yard loaders and anything that works in short bursts near a socket are the tractable cases. Heavy field tractors are the hard ones, and the obstacle is not reluctance or regulation — it is the sheer quantity of energy a day’s work consumes.

This article does not survey what manufacturers have announced. It does the one thing our records let us do that nobody else can: take 2,967 sourced fuel capacities and work out how much energy a tractor actually carries.

How much energy does a tractor carry?

More than most people guess, and the arithmetic is simple enough to check.

Diesel holds roughly 10 kWh per litre of chemical energy, and a diesel engine turns about 35% of that into work at the flywheel. Both of those are round numbers rather than figures from a source, and we would rather say so than dress them up: every conclusion below survives a twenty per cent error in either, and where a claim would turn on the precise value, we do not make it.

What is sourced is the tank, every litre of it, with its own source record on the model’s page.

  • The median machine we publish holds 92 litres — about 322 kWh of work.
  • A 2010s machine’s median is 230 litres, or roughly 805 kWh.
  • The largest tank in our records is 1,249 litres — the John Deere 9430 T — which is about 4,372 kWh of work.
  • The smallest is 12 litres.

For scale: a large electric car’s battery is of the order of 100 kWh. That is also a round number, and it is the ratio that matters. A modern field tractor sets out with something like eight times that much usable work on board, and the biggest machine in our records with forty times.

Why is a tractor harder than a car?

Duty cycle, and it is the whole argument.

A car spends most of its existence stationary and, when moving, draws a small fraction of its peak power. Average it over a day and a car is a light load with long idle periods — which is exactly the shape a battery suits, because the battery gets hours to recharge and never has to sustain its maximum output.

A tractor ploughing is the opposite. It sits near full load for hours at a stretch, because that is what the job is: converting fuel into pull against the resistance of soil. There is no cruising, no coasting, no long idle. The energy in the tank goes out through the drawbar more or less steadily until it is gone.

That is why a comparison by power misleads and a comparison by energy does not. Plenty of electric motors can produce a field tractor’s horsepower. What is hard is carrying enough energy to keep producing it from breakfast until dark.

Would the weight even be a problem?

Yes, but not for the reason people expect — and a tractor is the one vehicle where weight is partly an asset.

A tractor wants mass. Pulling is friction, friction needs weight on the driven wheels, and farmers deliberately add ballast. So the usual objection that a battery is heavy lands differently here than it does on a car.

The difficulty is the quantity. Take the 805 kWh of work in a 2010s tank. At a round 150 Wh per kilogram at pack level — another figure we are treating as a rough constant, not a sourced one — storing that much delivered energy electrically means something in the region of five tonnes of battery.

Set that against our records: the median published machine weighs 2,050 kg in the smallest power band and 10,727 kg in the largest. A battery sized to replace a big tank is heavier than most of the tractors we hold, and it arrives as volume that has to go somewhere a tractor does not have — because a tank is a void and a battery is a structure.

Ballast you can take off at the end of a wet week. A battery you cannot.

Which machines go electric first, then?

The ones whose energy problem is small, and our own data shows where that line sits.

Look at how tank size has moved: the 1930s 55 L · the 1940s 42 L · the 1950s 42 L · the 1960s 54 L · the 1970s 84 L · the 1980s 100 L · the 1990s 160 L · the 2000s 207 L · the 2010s 230 L. The 1940s and 1950s median of 55 litres belongs to machines doing yard work, light cultivation and short runs — a working day’s energy there is a fraction of a modern arable day’s, and that is the shape a battery fits.

The same logic applies now rather than historically. A yard loader shifting muck, a compact mowing amenity grass, a machine on a dairy doing feed and scraping: all of them work in bursts, near a building, with a socket a hundred metres away and hours of standing time. The energy per day is modest and the recharge window is generous.

Meanwhile the high-power machines at the other end do the opposite in every respect — long hours, continuous high load, miles from a supply, and in a season where the work cannot wait for a charge. They are last, and the gap between first and last is not a few years of engineering: it is an order of magnitude of energy.

And the tractable end is not a niche. Of the 3,232 machines we publish, 1,454 are under 60 hp — nearly half the corpus by count — with a median unladen mass of 2,050 kg. Another 1,162 sit between 60 and 120 hp. So “small machines first” is not a consolation prize: by number of distinct models, the part of the market where the physics already works is the larger part. It is the 200-plus band, 177 machines, that carries the hard problem — and those are the ones doing the acres.

That mismatch between count and work done is the thing to hold on to. A great many tractors could plausibly be electric. A great deal of farming is done by the few that cannot.

From our database

Queried 2 October 2026, across 3,232 published machines, of which 2,967 carry a sourced fuel capacity and 265 do not.

The trend in tank size is the clearest single number in this article, because it is a direct measure of how much energy the job has come to need:

the 1930s 55 L · the 1940s 42 L · the 1950s 42 L · the 1960s 54 L · the 1970s 84 L · the 1980s 100 L · the 1990s 160 L · the 2000s 207 L · the 2010s 230 L.

That is roughly a fourfold rise in on-board fuel from the 1950s to the 2010s, and it did not happen because tanks became fashionable. It happened because machines got larger, faster and more continuously loaded, and the working day’s energy demand rose with them. Electrification has to clear the 2010s bar, not the 1950s one.

What it does not tell you is when. Nothing in our data speaks to battery chemistry, charging infrastructure, machine prices or what any manufacturer intends, and this article deliberately says nothing about those: they are the parts where a confident sentence would be a guess wearing a number. What the figures do settle is the shape of the problem — which end is tractable, which end is not, and by roughly how much.

Two honest caveats. Our coverage skews older — the median published machine was introduced in 1983 — so the recent decades rest on fewer records, and the 2010s figure in particular is a median of a small group. And a fuel tank is a capacity, not a consumption: a machine with a 230-litre tank does not necessarily burn 230 litres a day. The tank tells you what the designers thought a working stint required, which is the right quantity for this question but is not the same as measured fuel use, which we do not hold.

See what the small end actually looks like in utility tractors, compare it with the high-power machines, or browse everything from the tractor index. For why the power figure on the bonnet is not the power reaching the work, see PTO horsepower versus engine horsepower.

Common questions

Are there electric tractors already?
Compact and yard machines are where battery power makes sense first, because their energy demand per day is a fraction of a field tractor's. This article does not survey what is on sale — it works out from our own fuel capacity records why the small end is tractable and the big end is not.
Why is a battery harder for a tractor than for a car?
Duty cycle. A car spends most of its life parked and uses a small fraction of its energy at any moment. A tractor ploughing is at high load for hours, so the energy it needs in a day is far larger relative to its size — our median machine's tank is about 322 kWh of work.
How much energy is in a tank of diesel?
Roughly 10 kWh a litre of chemical energy, of which a diesel engine turns about 35% into work. Those are round numbers rather than sourced figures, and we say so — the conclusions here survive a 20% error in either of them.
Could a battery tractor just carry more weight?
Weight is not the obstacle it first looks like, because a tractor wants weight for traction. The obstacle is that the weight arrives as volume and cost in the wrong places, and that a battery heavy enough to match a big tank exceeds the mass of the entire machine.
Which tractors will electrify last?
The high-power field machines. The largest tank in our records holds 1,249 litres, which is about 4,372 kWh of work — the energy problem at that end is an order of magnitude different from a yard loader's.

Sources

  1. Traktorenlexikon, the model articles cited on each tractor's page — Wikibooks, CC BY-SA 4.0. Retrieved . Original
  2. OECD standard codes for the official testing of agricultural tractors — OECD. Figures from these test reports are cited per machine on each model page, from the report records in our database; we hold no fetched copy of the OECD programme's web pages.