- WhichTractor size: Standard-size
- Not independently tested
- 1995–2003
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Case-Steyr 9125 a Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 9125 a.
Engine power, claimed · gross or net not stated
123 hp
92 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 9125”, claimed
How much will a 9125 a lift?
A 9125 a lifts 15,873 lb (7,200 kg) at the lower-link ends.
| Pump flow | 21.1 gpm · 80.0 L/min |
|---|---|
| Steering pump flow | 21.1 gpm · 80.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves, optional | 6 |
| Lift capacity at ball ends | 15,873 lb · 7,200 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 9125”
What PTO does a 9125 a have?
A 9125 a has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 2,208 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 9125”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Steyr 9125”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 9125 — CC BY-SA 4.0, WIKIBOOKS-TL-77027 · revision 993758. Wikibooks contributors (Traktorenlexikon). Original document