A version of the Case-IH JX80 · 2004–2008
Case-IH JX 80 U (A)
How does the JX 80 U (A) differ?
The JX 80 U (A) has the IVECO 8045.05 R (TIER I) engine, is 2WD, weighs 7,859 lb · 3,565 kg; the 5 other versions on record are set out beside it. Shared figures are on the model page.
| Differs in | JX 80 U (A) | JX80 (2WD) | JX80 (4WD) | JX 80 (A) | JX 80 (A) (4WD) | JX 80 U (A) (4WD) |
|---|---|---|---|---|---|---|
| Engine | IVECO 8045.05 R (TIER I) | TTF 8035.25E.313TSource 1 | TTF 8035.25E.313TSource 1 | IVECO 8045.05 R (EURO II)Source 3 | IVECO 8045.05 R (EURO II)Source 3 | IVECO 8045.05 R (TIER I) |
| Drive | 2WD | 2WDSource 1 | 4WDSource 2 | 4WDSource 3 | 4WDSource 3 | 4WD |
| Weight | 7,859 lb · 3,565 kg | — | — | 6,199 lb · 2,812 kgSource 3 | 6,859 lb · 3,111 kgSource 3 | 8,322 lb · 3,775 kg |
What else is on record for the JX 80 U (A)?
| Forward gears | 20 |
|---|---|
| Reverse gears | 12 |
| Transmission as described | 24 forward/24 reverse and 20 forward/12 reverse |
| Cooling | Liquid-cooled |
| Clutch | Pedal-operated dry LuK single-disc clutch |
| Wheelbase | 91.1 in · 2,314 mm |
| Fuel tank | 121.5 qt · 115.0 L |
| Front tyre, standard | 7.50-16 ASF (A: 320/70 R 24 AS) |
| System voltage | 12 V |
| Operator enclosure | Cab |
| Hydraulic control | Load sensing |
| Fuel injection | Direct injection |
| Top speed forward | 18.6–24.9 mph · 30–40 km/h |
| Pump flow | 16.3 gpm · 61.8 L/min |
| Length | 152.8 in · 3,880 mm |
| Rear tyre, standard | 480/70 R 30 AS |
| Top speed reverse | 18.1 mph · 29.18 km/h |
| Construction | block construction (frameless) |
| Maximum torque | 196 lb·ft · 266 N·m |
| Hydraulic pressure | 2,103 psi · 145 bar |
| Width | 78.3 in · 1,990 mm |
| Battery | 12 V-132 Ah |
| Maximum torque speed | 1,400 rpm |
| Service brakes | Pedal-operated wet CNH disc brake acting on differential side shafts |
| Height to top | 97.4 in · 2,475 mm |
| Maximum permissible mass | 11,464 lb · 5,200 kg |
| Cylinders | 4 |
| Ground clearance | 17.7 in · 450 mm |
| Displacement | 4.1 qt · 3.9 L |
| Bore | 4.1 in · 104 mm |
| Stroke | 4.5 in · 115 mm |
| Rated engine speed | 2,500 rpm |
| Torque rise | 31.6 % |
| Lift capacity at ball ends | 9,811 lb · 4,450 kg |
| Front track | 55.1–85.4 in · 1,400–2,170 mm |
| Lift capacity 610 mm behind ends | 2,866 lb · 1,300 kg |
| Rear track | 52.4–86.8 in · 1,330–2,205 mm |
| Front axle | Pendulating, hydraulically operated CNH steering drive axle with central drive |
| Turning radius with brakes | 12.1 ft · 3.70 m |
| Engine speed at 540 PTO | 2,199 rpm |
| Engine power, gross or net not stated, claimed, standard not stated by the source | 77.0 hp · 57.4 kW |
| PTO power, claimed, standard not stated by the source | 66.0 hp · 49.2 kW |
Source · Traktorenlexikon, “Case-IH JX80U”
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 632: Case IH JX80 — Licence not stated by the publisher; facts cited, OECD-2632 · published 2011-09-07 · retrieved 2026-09-14. OECD; testing station TAMTEST, Ankara, Turkey. Original document
- OECD Code 2 test report 2/2 633: Case IH JX80 — Licence not stated by the publisher; facts cited, OECD-2633 · published 2011-09-07 · retrieved 2026-09-14. OECD; testing station TAMTEST, Ankara, Turkey. Original document
- Traktorenlexikon: Case-IH JX80 — CC BY-SA 4.0, WIKIBOOKS-TL-115721 · revision 982925. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH JX80U — CC BY-SA 4.0, WIKIBOOKS-TL-115742 · revision 983327. Wikibooks contributors (Traktorenlexikon). Original document