VOLVO-BM-VALMET 405 (405/4) or ZETOR 4320/4340?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 405 (405/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4320/4340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 405 (405/4) | 4320/4340 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 44.9 kW (60.2 hp)Traktorenlexikon, “Volvo 405” | 44.9 kW (60.2 hp)Traktorenlexikon, “Zetor 4320/4340” | Not comparableNot comparable on power at the PTO shaft: the 405 (405/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4320/4340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 405 (405/4) and the 4320/4340. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 405 (405/4) and the 4320/4340. |
| Which pumps more oil for implements? | 36.6 L/min (9.7 gpm)Traktorenlexikon, “Volvo 405” | 31.8 L/min (8.4 gpm)Traktorenlexikon, “Zetor 4320/4340” | AheadThe VOLVO-BM-VALMET 405 (405/4) has 15% more hydraulic flow (4.8 L/min / 1.3 gpm) than the ZETOR 4320/4340 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 1,805 kg (3,979 lb)Traktorenlexikon, “Volvo 405” | 2,653 kg (5,849 lb)Traktorenlexikon, “Zetor 4320/4340” | AheadThe ZETOR 4320/4340 has 47% more lift (848 kg / 1,870 lb) than the VOLVO-BM-VALMET 405 (405/4) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,710 kg (5,975 lb)Traktorenlexikon, “Volvo 405” | 2,880 kg (6,349 lb)Traktorenlexikon, “Zetor 4320/4340” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 5,600 kg (12,346 lb)Traktorenlexikon, “Zetor 4320/4340” | No figureNo call on maximum permissible mass: no figure on record for the 405 (405/4). |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Volvo 405” | 10 to 20Traktorenlexikon, “Zetor 4320/4340” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 405 (405/4) and the 4320/4340. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Volvo 405” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Zetor 4320/4340” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Volvo 405” | 540/1000 rpmTraktorenlexikon, “Zetor 4320/4340” | AheadThe ZETOR 4320/4340 offers 1000 rpm at the PTO, which the VOLVO-BM-VALMET 405 (405/4) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Volvo 405” | — | No figureNo call on PTO independence: not stated for the 4320/4340. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Volvo 405” | Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 4320/4340” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1985 | 1993–1997 | Ahead (a fact, not an advantage)The ZETOR 4320/4340 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VOLVO-BM-VALMET 405 (405/4) has 15% more hydraulic flow (4.8 L/min / 1.3 gpm) than the ZETOR 4320/4340 (both pump flow, as stated by the source).
- The ZETOR 4320/4340 has 47% more lift (848 kg / 1,870 lb) than the VOLVO-BM-VALMET 405 (405/4) (both lift at the hitch ends, as stated by the source).
- The ZETOR 4320/4340 offers 1000 rpm at the PTO, which the VOLVO-BM-VALMET 405 (405/4) does not (as stated by the sources).
- The ZETOR 4320/4340 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 405 (405/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 4320/4340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources