VALMET Mega 8150 HiTech or WHITE 6125?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Mega 8150 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The VALMET Mega 8150 HiTech suits loader and hydraulic implement work better on this data: 119% (3,202 kg / 7,059 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for VALMET Mega 8150 HiTech and WHITE 6125, with the call on each
QuestionMega 8150 HiTech6125Call
Which puts more power through the PTO shaft?91.9 kW (123.2 hp)Traktorenlexikon, “Valmet Mega-8150 HiTech”91.9 kW (123.2 hp)Traktorenlexikon, “White 6125”Not comparableNot comparable on power at the PTO shaft: the Mega 8150 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Mega 8150 HiTech and the 6125.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Mega 8150 HiTech and the 6125.
Which pumps more oil for implements?77.4 L/min (20.4 gpm)Traktorenlexikon, “Valmet Mega-8150 HiTech”78.0 L/min (20.6 gpm)Traktorenlexikon, “White 6125”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?5,884 kg (12,972 lb)Traktorenlexikon, “Valmet Mega-8150 HiTech”2,682 kg (5,913 lb)Traktorenlexikon, “White 6125”AheadThe VALMET Mega 8150 HiTech has 119% more lift (3,202 kg / 7,059 lb) than the WHITE 6125 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,590 kg (12,324 lb)Traktorenlexikon, “Valmet Mega-8150 HiTech”6,985 kg (15,399 lb)Traktorenlexikon, “White 6125”Ahead (a fact, not an advantage)The WHITE 6125 is 25% heavier (1,395 kg / 3,075 lb) than the VALMET Mega 8150 HiTech (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Valmet Mega-8150 HiTech”—No figureNo call on maximum permissible mass: no figure on record for the 6125.
Which has the wider choice of gears?36Traktorenlexikon, “Valmet Mega-8150 HiTech”18Traktorenlexikon, “White 6125”AheadThe VALMET Mega 8150 HiTech has 100% more forward gears (18 gears) than the WHITE 6125 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Mega 8150 HiTech and the 6125.
Which is faster on the road?40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8150 HiTech”40 km/h (24.9 mph)Traktorenlexikon, “White 6125”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Valmet Mega-8150 HiTech”540/1000 rpmTraktorenlexikon, “White 6125”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Valmet Mega-8150 HiTech”independentTraktorenlexikon, “White 6125”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Valmet Mega-8150 HiTech”Two-wheel or four-wheel driveTraktorenlexikon, “White 6125”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1998–20041993–1997Ahead (a fact, not an advantage)The VALMET Mega 8150 HiTech is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The VALMET Mega 8150 HiTech has 119% more lift (3,202 kg / 7,059 lb) than the WHITE 6125 (both lift at the hitch ends, as stated by the source).
  • The WHITE 6125 is 25% heavier (1,395 kg / 3,075 lb) than the VALMET Mega 8150 HiTech (both unladen weight, as stated by the source).
  • The VALMET Mega 8150 HiTech has 100% more forward gears (18 gears) than the WHITE 6125 (both forward gears, as stated by the source).
  • The VALMET Mega 8150 HiTech is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the Mega 8150 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources