VALMET Mega 8050 HiTech or ZETOR 11641?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the Mega 8050 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 11641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET Mega 8050 HiTech suits loader and hydraulic implement work better on this data: 18% (985 kg / 2,172 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | Mega 8050 HiTech | 11641 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 80.9 kW (108.5 hp)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 80.9 kW (108.5 hp)Traktorenlexikon, “Zetor 11641 (1999-2002)” | Not comparableNot comparable on power at the PTO shaft: the Mega 8050 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 11641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the Mega 8050 HiTech and the 11641. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the Mega 8050 HiTech and the 11641. |
| Which pumps more oil for implements? | 71.0 L/min (18.8 gpm)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 65.0 L/min (17.2 gpm)Traktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 6,400 kg (14,110 lb)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 5,415 kg (11,938 lb)Traktorenlexikon, “Zetor 11641 (1999-2002)” | AheadThe VALMET Mega 8050 HiTech has 18% more lift (985 kg / 2,172 lb) than the ZETOR 11641 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,740 kg (10,450 lb)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 4,645 kg (10,240 lb)Traktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 7,800 kg (17,196 lb)Traktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 36Traktorenlexikon, “Valmet Mega-8050 HiTech” | 24Traktorenlexikon, “Zetor 11641 (1999-2002)” | AheadThe VALMET Mega 8050 HiTech has 50% more forward gears (12 gears) than the ZETOR 11641 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the Mega 8050 HiTech and the 11641. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8050 HiTech” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Valmet Mega-8050 HiTech” | 540/1000 rpmTraktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Valmet Mega-8050 HiTech” | independentTraktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Valmet Mega-8050 HiTech” | 4WDTraktorenlexikon, “Zetor 11641 (1999-2002)” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1998–2004 | 1999–2002 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET Mega 8050 HiTech has 18% more lift (985 kg / 2,172 lb) than the ZETOR 11641 (both lift at the hitch ends, as stated by the source).
- The VALMET Mega 8050 HiTech has 50% more forward gears (12 gears) than the ZETOR 11641 (both forward gears, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the Mega 8050 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 11641 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources