VALMET 8150 vs WHITE 6125

11 material differences · fewer than 12

Tractor one

1995–2004

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 8150 and the 6125 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

VALMET 8150 and WHITE 6125, field by field
Field	8150	6125	Gap
Engine
Engine power, claimed claimed	123.2 hp	123.2 hp	—
Engine declared	VALMET 620 DSR or 620 DSRE	CUMMINS 6 BT-5.9 A	differs
Displacement declared	6.59 L	5.88 L	+12% 8150
Maximum torque declared	363 lb·ft · 492 N·m	390 lb·ft · 529 N·m	+8% 6125
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated dry Fichtel & Sachs single-disc clutch	Hydraulically operated wet FUNK multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	20.4 gpm · 77.4 L/min	20.6 gpm · 78.0 L/min	—
Pressure declared	3,046 psi · 210 bar	2,248 psi · 155 bar	+35% 8150
Three-point lift at ends declared	12,972 lb · 5,884 kg	5,913 lb · 2,682 kg	+119% 8150
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,803 lb · 4,900 kg	15,399 lb · 6,985 kg	+43% 6125
Maximum permissible mass declared	17,637 lb · 8,000 kg	—	—
Wheelbase declared	100.7 in · 2,558 mm	106.0 in · 2,692 mm	—
Length declared	190.6 in · 4,840 mm	182.4 in · 4,633 mm	—
Width declared	84.8 in · 2,155 mm	115.0 in · 2,921 mm	+36% 6125
Height declared	109.8 in · 2,790 mm	123.5 in · 3,137 mm	+12% 6125
Ground clearance declared	17.3 in · 440 mm	—	—
Fuel tank declared	174.4 qt · 165.0 L	267.9 qt · 253.5 L	+54% 6125

Source

Source