VALMET 8150 or WHITE 6125 (White)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 8150 suits loader and hydraulic implement work better on this data: 119% (3,202 kg / 7,059 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8150 | 6125 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 91.9 kW (123.2 hp)Traktorenlexikon, “Valmet Mega-8150” | 91.9 kW (123.2 hp)Traktorenlexikon, “AGCO-White 6125” | Not comparableNot comparable on power at the PTO shaft: the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8150 and the 6125. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8150 and the 6125. |
| Which pumps more oil for implements? | 77.4 L/min (20.4 gpm)Traktorenlexikon, “Valmet Mega-8150” | 78.0 L/min (20.6 gpm)Traktorenlexikon, “AGCO-White 6125” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 5,884 kg (12,972 lb)Traktorenlexikon, “Valmet Mega-8150” | 2,682 kg (5,913 lb)Traktorenlexikon, “AGCO-White 6125” | AheadThe VALMET 8150 has 119% more lift (3,202 kg / 7,059 lb) than the WHITE 6125 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,900 kg (10,803 lb)Traktorenlexikon, “Valmet Mega-8150” | 6,985 kg (15,399 lb)Traktorenlexikon, “AGCO-White 6125” | Ahead (a fact, not an advantage)The WHITE 6125 is 43% heavier (2,085 kg / 4,597 lb) than the VALMET 8150 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 8,000 kg (17,637 lb)Traktorenlexikon, “Valmet Mega-8150” | — | No figureNo call on maximum permissible mass: no figure on record for the 6125. |
| Which has the wider choice of gears? | 36Traktorenlexikon, “Valmet Mega-8150” | 18Traktorenlexikon, “AGCO-White 6125” | AheadThe VALMET 8150 has 100% more forward gears (18 gears) than the WHITE 6125 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8150 and the 6125. |
| Which is faster on the road? | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8150” | 40 km/h (24.9 mph)Traktorenlexikon, “AGCO-White 6125” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Valmet Mega-8150” | 540/1000 rpmTraktorenlexikon, “AGCO-White 6125” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “AGCO-White 6125” | No figureNo call on PTO independence: not stated for the 8150. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Valmet Mega-8150” | Two-wheel or four-wheel driveTraktorenlexikon, “AGCO-White 6125” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1993–1997 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 8150 has 119% more lift (3,202 kg / 7,059 lb) than the WHITE 6125 (both lift at the hitch ends, as stated by the source).
- The WHITE 6125 is 43% heavier (2,085 kg / 4,597 lb) than the VALMET 8150 (both unladen weight, as stated by the source).
- The VALMET 8150 has 100% more forward gears (18 gears) than the WHITE 6125 (both forward gears, as stated by the source).
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 8150 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6125 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources