VALMET 705/705-4 vs ZETOR 9520/9540

11 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1992–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 705/705-4 and the 9520/9540 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

VALMET 705/705-4 and ZETOR 9520/9540, field by field
Field	705/705-4	9520/9540	Gap
Engine
Engine power, claimed claimed	82 hp	92.7 hp	+13% 9520/9540
Engine declared	VALMET TD 44 DS 7	ZBROJOVKA Z-1001	differs
Displacement declared	4.40 L	4.16 L	+6% 705/705-4
Maximum torque declared	235 lb·ft · 318 N·m	275 lb·ft · 373 N·m	+17% 9520/9540
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry LuK single-disc clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	12.7 gpm · 48.0 L/min	11.3 gpm · 42.9 L/min	+12% 705/705-4
Pressure declared	3,191 psi · 220 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	—	10,207 lb · 4,630 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,356 lb · 3,790 kg	8,157 lb · 3,700 kg	—
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	93.9 in · 2,385 mm	93.5 in · 2,375 mm	—
Length declared	177.8 in · 4,515 mm	165.0 in · 4,190 mm	+8% 705/705-4
Width declared	83.9 in · 2,130 mm	76.8 in · 1,950 mm	+9% 705/705-4
Height declared	105.1 in · 2,670 mm	104.1 in · 2,645 mm	—
Ground clearance declared	18.8 in · 478 mm	13.9 in · 352 mm	+36% 705/705-4
Turning radius, braked declared	—	12.2 ft · 3.73 m	—
Fuel tank declared	190.2 qt · 180.0 L	111.0 qt · 105.0 L	+71% 705/705-4

Source

Source