VALMET 6350 HiTech vs ZETOR 9641 (2007-2009)

9 material differences · fewer than 12

Tractor one

1999–2006

No measured PTO figure

Tractor two

2007–2009

No measured PTO figure

Which should you choose?

Read our verdict on the 6350 HiTech and the 9641 (2007-2009) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

VALMET 6350 HiTech and ZETOR 9641 (2007-2009), field by field
Field	6350 HiTech	9641 (2007-2009)	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	VALMET 420 DSRE or 44.311 DT	Zetor Z-1005	differs
Displacement declared	4.40 L	4.16 L	+6% 6350 HiTech
Maximum torque declared	—	288 lb·ft · 391 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal-operated dry Zetor single-plate clutch	—
Hydraulics & hitch
Pump flow declared	18.5 gpm · 70.0 L/min	18.4 gpm · 69.6 L/min	—
Pressure declared	2,901 psi · 200 bar	3,046 psi · 210 bar	—
Three-point lift at ends declared	12,346 lb · 5,600 kg	10,880 lb · 4,935 kg	+13% 6350 HiTech
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,516 lb · 4,770 kg	10,075 lb · 4,570 kg	—
Maximum permissible mass declared	19,842 lb · 9,000 kg	16,711 lb · 7,580 kg	+19% 6350 HiTech
Wheelbase declared	91.6 in · 2,326 mm	94.4 in · 2,397 mm	—
Length declared	180.5 in · 4,585 mm	166.9 in · 4,240 mm	+8% 6350 HiTech
Width declared	92.3 in · 2,345 mm	85.2 in · 2,165 mm	+8% 6350 HiTech
Height declared	110.2 in · 2,800 mm	108.7 in · 2,760 mm	—
Ground clearance declared	17.1 in · 434 mm	17.9 in · 455 mm	—
Turning radius, braked declared	15.3 ft · 4.65 m	—	—
Fuel tank declared	174.4 qt · 165.0 L	190.2 qt · 180.0 L	+9% 9641 (2007-2009)

Source

Source