8 material differences · fewer than 12
Tractor oneVALMET 6350 HiTech1999–2006No measured PTO figureTractor twoVALMET 9001997–2002No measured PTO figure
Which should you choose?
Read our verdict on the 6350 HiTech and the 900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 6350 HiTech | 900 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 88.8 hp | — |
| Engine declared | VALMET 420 DSRE or 44.311 DT | VALMET 420 DS or DSRE | differs |
| Displacement declared | 4.40 L | 4.40 L | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | — | dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Constant flow | — |
| Pump flow declared | 18.5 gpm · 70.0 L/min | 14.7 gpm · 55.7 L/min | +26% 6350 HiTech |
| Pressure declared | 2,901 psi · 200 bar | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,516 lb · 4,770 kg | 7,408 lb · 3,360 kg | +42% 6350 HiTech |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | — | — |
| Wheelbase declared | 91.6 in · 2,326 mm | 88.3 in · 2,244 mm | — |
| Length declared | 180.5 in · 4,585 mm | 152.6 in · 3,877 mm | +18% 6350 HiTech |
| Width declared | 92.3 in · 2,345 mm | 85.7 in · 2,177 mm | +8% 6350 HiTech |
| Ground clearance declared | 17.1 in · 434 mm | 19.9 in · 505 mm | +16% 900 |
| Turning radius, braked declared | 15.3 ft · 4.65 m | 15.7 ft · 4.80 m | — |
| Fuel tank declared | 174.4 qt · 165.0 L | 83.5 qt · 79.0 L | +109% 6350 HiTech |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 6350 HiTech sources
- Source: Traktorenlexikon, “Valmet 6350 HiTech”
VALMET 900 sources
- Source: Traktorenlexikon, “Valmet 900/II”
- Source: Traktorenlexikon, “Valmet 800”