VALMET 6100-4 or VALMET 665?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 6100-4: hydraulic flow and three-point lift. It is also ahead on PTO speeds.
- The VALMET 6100-4 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
- The VALMET 6100-4 suits loader and hydraulic implement work better on this data: 53% (27.9 L/min / 7.4 gpm) more hydraulic flow and 69% (1,775 kg / 3,913 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 6100-4 | 665 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 49.0 kW (65.7 hp)Traktorenlexikon, “Valmet 6100” | 49.0 kW (65.7 hp)Traktorenlexikon, “Valmet 665” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 6100-4 and the 665. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 6100-4 and the 665. |
| Which pumps more oil for implements? | 80.3 L/min (21.2 gpm)Traktorenlexikon, “Valmet 6100” | 52.4 L/min (13.8 gpm)Traktorenlexikon, “Valmet 665” | AheadThe VALMET 6100-4 has 53% more hydraulic flow (27.9 L/min / 7.4 gpm) than the VALMET 665 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,355 kg (9,601 lb)Traktorenlexikon, “Valmet 6100” | 2,580 kg (5,688 lb)Traktorenlexikon, “Valmet 665” | AheadThe VALMET 6100-4 has 69% more lift (1,775 kg / 3,913 lb) than the VALMET 665 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,000 kg (8,818 lb)Traktorenlexikon, “Valmet 6100” | 3,280 kg (7,231 lb)Traktorenlexikon, “Valmet 665” | Ahead (a fact, not an advantage)The VALMET 6100-4 is 22% heavier (720 kg / 1,587 lb) than the VALMET 665 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,300 kg (13,889 lb)Traktorenlexikon, “Valmet 6100” | — | No figureNo call on maximum permissible mass: no figure on record for the 665. |
| Which has the wider choice of gears? | 12 to 36Traktorenlexikon, “Valmet 6100” | 8 to 12Traktorenlexikon, “Valmet 665” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 6100-4 and the 665. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6100” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 665” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Valmet 6100” | 540E/540 rpmTraktorenlexikon, “Valmet 665” | AheadThe VALMET 6100-4 offers 1000 rpm at the PTO, which the VALMET 665 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 6100-4 and the 665. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Valmet 6100” | 4WDTraktorenlexikon, “Valmet 665” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1991–1994 | 1992–1997 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6100-4 has 53% more hydraulic flow (27.9 L/min / 7.4 gpm) than the VALMET 665 (both pump flow, as stated by the source).
- The VALMET 6100-4 has 69% more lift (1,775 kg / 3,913 lb) than the VALMET 665 (both lift at the hitch ends, as stated by the source).
- The VALMET 6100-4 is 22% heavier (720 kg / 1,587 lb) than the VALMET 665 (both unladen weight, as stated by the source).
- The VALMET 6100-4 offers 1000 rpm at the PTO, which the VALMET 665 does not (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources