VALMET 555-4 or ZETOR 5320/5340?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 555-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5320/5340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The ZETOR 5320/5340 suits loader and hydraulic implement work better on this data: 30% (9.4 L/min / 2.5 gpm) more hydraulic flow and 10% (266 kg / 586 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 555-4 | 5320/5340 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 53 kW (71 hp)Traktorenlexikon, “Valmet 555” | 53 kW (71 hp)Traktorenlexikon, “Zetor 5320/5340” | Not comparableNot comparable on power at the PTO shaft: the 555-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5320/5340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 555-4 and the 5320/5340. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 555-4 and the 5320/5340. |
| Which pumps more oil for implements? | 31.6 L/min (8.3 gpm)Traktorenlexikon, “Valmet 555” | 41.0 L/min (10.8 gpm)Traktorenlexikon, “Zetor 5320/5340” | AheadThe ZETOR 5320/5340 has 30% more hydraulic flow (9.4 L/min / 2.5 gpm) than the VALMET 555-4 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,640 kg (5,820 lb)Traktorenlexikon, “Valmet 555” | 2,906 kg (6,407 lb)Traktorenlexikon, “Zetor 5320/5340” | AheadThe ZETOR 5320/5340 has 10% more lift (266 kg / 586 lb) than the VALMET 555-4 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,100 kg (6,834 lb)Traktorenlexikon, “Valmet 555” | 2,925 kg (6,449 lb)Traktorenlexikon, “Zetor 5320/5340” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 5,600 kg (12,346 lb)Traktorenlexikon, “Zetor 5320/5340” | No figureNo call on maximum permissible mass: no figure on record for the 555-4. |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Valmet 555” | 10 to 20Traktorenlexikon, “Zetor 5320/5340” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 555-4 and the 5320/5340. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 555” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Zetor 5320/5340” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Valmet 555” | 540/1000 rpmTraktorenlexikon, “Zetor 5320/5340” | AheadThe ZETOR 5320/5340 offers 1000 rpm at the PTO, which the VALMET 555-4 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Valmet 555” | — | No figureNo call on PTO independence: not stated for the 5320/5340. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Valmet 555” | Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 5320/5340” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1990–1992 | 1993–1997 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The ZETOR 5320/5340 has 30% more hydraulic flow (9.4 L/min / 2.5 gpm) than the VALMET 555-4 (both pump flow, as stated by the source).
- The ZETOR 5320/5340 has 10% more lift (266 kg / 586 lb) than the VALMET 555-4 (both lift at the hitch ends, as stated by the source).
- The ZETOR 5320/5340 offers 1000 rpm at the PTO, which the VALMET 555-4 does not (as stated by the sources).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 555-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 5320/5340 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources