14 material differences
Tractor oneVALMET 45001993–1996No measured PTO figureTractor twoVALMET 6000-41993–1996No measured PTO figure
Which should you choose?
Read our verdict on the 4500 and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4500 | 6000-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74.0 hp | — |
| Engine declared | VALMET 320 DS | VALMET 420 D | differs |
| Displacement declared | 3.30 L | 4.40 L | +33% 6000-4 |
| Maximum torque declared | 203 lb·ft · 275 N·m | 182 lb·ft · 247 N·m | +11% 4500 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry double clutch | dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.3 gpm · 39.0 L/min | 21.2 gpm · 80.3 L/min | +106% 6000-4 |
| Pressure declared | 2,901 psi · 200 bar | 2,901 psi · 200 bar | — |
| Three-point lift, at the coupling points declared | 6,294 lb · 2,855 kg | 9,601 lb · 4,355 kg | +53% 6000-4 |
| Rear PTO speeds declared | 540E/540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,217 lb · 2,820 kg | 9,193 lb · 4,170 kg | +48% 6000-4 |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 83.1 in · 2,112 mm | 99.6 in · 2,530 mm | +20% 6000-4 |
| Length declared | 149.2 in · 3,790 mm | 175.2 in · 4,450 mm | +17% 6000-4 |
| Width declared | 81.5 in · 2,070 mm | 85.2 in · 2,165 mm | — |
| Ground clearance declared | 19.9 in · 505 mm | 16.9 in · 430 mm | +17% 4500 |
| Turning radius, braked declared | 12.8 ft · 3.90 m | 15.3 ft · 4.65 m | +19% 6000-4 |
| Fuel tank declared | 100.4 qt · 95.0 L | 167.0 qt · 158.0 L | +66% 6000-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 4500 sources
Source
- Source: Traktorenlexikon, “Valmet 4500”
- Source: Traktorenlexikon, “Valmet 465”
VALMET 6000-4 sources
Source
- Source: Traktorenlexikon, “Valmet 6000”
- Source: Traktorenlexikon, “Valmet 665”