VALMET 4300 or ZETOR Proxima 6421/6441?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 4300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Proxima 6421/6441 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The ZETOR Proxima 6421/6441 suits loader and hydraulic implement work better on this data: 19% (7.3 L/min / 1.9 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 4300 | Proxima 6421/6441 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 44.9 kW (60.2 hp)Traktorenlexikon, “Valmet 4300” | 44.9 kW (60.2 hp)Traktorenlexikon, “Zetor Proxima 6421/6441” | Not comparableNot comparable on power at the PTO shaft: the 4300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Proxima 6421/6441 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 4300 and the Proxima 6421/6441. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 4300 and the Proxima 6421/6441. |
| Which pumps more oil for implements? | 39.0 L/min (10.3 gpm)Traktorenlexikon, “Valmet 4300” | 46.3 L/min (12.2 gpm)Traktorenlexikon, “Zetor Proxima 6421/6441” | AheadThe ZETOR Proxima 6421/6441 has 19% more hydraulic flow (7.3 L/min / 1.9 gpm) than the VALMET 4300 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,855 kg (6,294 lb)Traktorenlexikon, “Valmet 4300” | 2,692 kg (5,935 lb)Traktorenlexikon, “Zetor Proxima 6421/6441” | Not comparableNot comparable on three-point lift: the 4300: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 4300”); the Proxima 6421/6441: lift at an unstated point, as stated by the source (Traktorenlexikon, “Zetor Proxima 6421/6441”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 2,790 kg (6,151 lb)Traktorenlexikon, “Valmet 4300” | 3,130 kg (6,900 lb)Traktorenlexikon, “Zetor Proxima 6421/6441” | Ahead (a fact, not an advantage)The ZETOR Proxima 6421/6441 is 12% heavier (340 kg / 750 lb) than the VALMET 4300 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 5,400 kg (11,905 lb)Traktorenlexikon, “Zetor Proxima 6421/6441” | No figureNo call on maximum permissible mass: no figure on record for the 4300. |
| Which has the wider choice of gears? | 8 to 12Traktorenlexikon, “Valmet 4300” | 10 to 20Traktorenlexikon, “Zetor Proxima 6421/6441” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 4300 and the Proxima 6421/6441. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 4300” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Zetor Proxima 6421/6441” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540E/540 rpmTraktorenlexikon, “Valmet 4300” | 540/1000 rpmTraktorenlexikon, “Zetor Proxima 6421/6441” | AheadThe ZETOR Proxima 6421/6441 offers 1000 rpm at the PTO, which the VALMET 4300 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Valmet 4300” | — | No figureNo call on PTO independence: not stated for the Proxima 6421/6441. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 4300” | Two-wheel or four-wheel driveTraktorenlexikon, “Zetor Proxima 6421/6441” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1996 | 2004–2007 | Ahead (a fact, not an advantage)The ZETOR Proxima 6421/6441 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The ZETOR Proxima 6421/6441 has 19% more hydraulic flow (7.3 L/min / 1.9 gpm) than the VALMET 4300 (both pump flow, as stated by the source).
- The ZETOR Proxima 6421/6441 is 12% heavier (340 kg / 750 lb) than the VALMET 4300 (both unladen weight, as stated by the source).
- The ZETOR Proxima 6421/6441 offers 1000 rpm at the PTO, which the VALMET 4300 does not (as stated by the sources).
- The ZETOR Proxima 6421/6441 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 4300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Proxima 6421/6441 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the 4300: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 4300”); the Proxima 6421/6441: lift at an unstated point, as stated by the source (Traktorenlexikon, “Zetor Proxima 6421/6441”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources