8 material differences · fewer than 12

Tractor oneVALMET 255 (255-4)1992–1994No measured PTO figureTractor twoVALMET 41001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 255 (255-4) and the 4100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 10 fields identical or within 5%, which is not counted as material

VALMET 255 (255-4) and VALMET 4100, field by field
Field	255 (255-4)	4100	Gap
Engine
Engine power, claimed claimed	52 hp	52 hp	—
Engine declared	VALMET 320 D	VALMET 320 D	—
Displacement declared	3.30 L	3.30 L	—
Maximum torque declared	148 lb·ft · 200 N·m	144 lb·ft · 195 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal operated dry Fichtel & Sachs single plate clutch	dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	10.3 gpm · 39.0 L/min	10.3 gpm · 39.0 L/min	—
Pressure declared	2,901 psi · 200 bar	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	5,688 lb · 2,580 kg	6,294 lb · 2,855 kg	+11% 4100
Rear PTO speeds declared	540/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,217 lb · 2,820 kg	5,864 lb · 2,660 kg	+6% 255 (255-4)
Wheelbase declared	83.1 in · 2,112 mm	83.1 in · 2,112 mm	—
Length declared	146.1 in · 3,710 mm	149.2 in · 3,790 mm	—
Width declared	77.4–97.8 in · 1,965–2,485 mm	68.0 in · 1,728 mm	differs
Height, over the cab declared	96.9 in · 2,460 mm	92.5 in · 2,350 mm	—
Ground clearance declared	15.9 in · 405 mm	16.7 in · 425 mm	—
Turning radius, braked declared	10.2 ft · 3.10 m	12.8 ft · 3.90 m	+26% 4100
Fuel tank declared	77.1 qt · 73.0 L	100.4 qt · 95.0 L	+30% 4100

Source

Source