VALMET 2005-4 or VOLVO-BM T 2650?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 2005-4: hydraulic flow and three-point lift. It is also ahead on drive.
- The VALMET 2005-4 suits loader and hydraulic implement work better on this data: 33% (15.6 L/min / 4.1 gpm) more hydraulic flow and 39% (1,320 kg / 2,910 lb) more three-point lift.
- The VALMET 2005-4 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2005-4 | T 2650 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 95.8 kW (128.5 hp)Traktorenlexikon, “Valmet 2005” | 95.6 kW (128 hp)Traktorenlexikon, “Volvo T 2650” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2005-4 and the T 2650. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2005-4 and the T 2650. |
| Which pumps more oil for implements? | 62.6 L/min (16.5 gpm)Traktorenlexikon, “Valmet 2005” | 47.0 L/min (12.4 gpm)Traktorenlexikon, “Volvo T 2650” | AheadThe VALMET 2005-4 has 33% more hydraulic flow (15.6 L/min / 4.1 gpm) than the VOLVO-BM T 2650 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,720 kg (10,406 lb)Traktorenlexikon, “Valmet 2005” | 3,400 kg (7,496 lb)Traktorenlexikon, “Volvo T 2650” | AheadThe VALMET 2005-4 has 39% more lift (1,320 kg / 2,910 lb) than the VOLVO-BM T 2650 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,335 kg (13,966 lb)Traktorenlexikon, “Valmet 2005” | 6,600 kg (14,551 lb)Traktorenlexikon, “Volvo T 2650” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 2005-4 and the T 2650. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Valmet 2005” | 14Traktorenlexikon, “Volvo T 2650” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2005-4 and the T 2650. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 2005” | 30 km/h (18.6 mph)Traktorenlexikon, “Volvo T 2650” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Valmet 2005” | 540/1000 rpmTraktorenlexikon, “Volvo T 2650” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Volvo T 2650” | No figureNo call on PTO independence: not stated for the 2005-4. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Valmet 2005” | 2WDTraktorenlexikon, “Volvo T 2650” | AheadThe VALMET 2005-4 is available with four-wheel drive; the VOLVO-BM T 2650 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1986–1987 | 1978–1984 | Ahead (a fact, not an advantage)The VALMET 2005-4 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 2005-4 has 33% more hydraulic flow (15.6 L/min / 4.1 gpm) than the VOLVO-BM T 2650 (both pump flow, as stated by the source).
- The VALMET 2005-4 has 39% more lift (1,320 kg / 2,910 lb) than the VOLVO-BM T 2650 (both lift at the hitch ends, as stated by the source).
- The VALMET 2005-4 is available with four-wheel drive; the VOLVO-BM T 2650 is two-wheel drive (as stated by the sources).
- The VALMET 2005-4 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources